전자부품 데이터시트 검색엔진
  Korean  ▼
ALLDATASHEET.CO.KR

X  

MCP3918A1-E/ML 데이터시트(PDF) 53 Page - Microchip Technology

부품명 MCP3918A1-E/ML
상세설명  3V Single-Channel Analog Front End
PDF  88 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
제조업체  MICROCHIP [Microchip Technology]
홈페이지  http://www.microchip.com
Logo MICROCHIP - Microchip Technology

MCP3918A1-E/ML 데이터시트(HTML) 53 Page - Microchip Technology

Back Button MCP3918A1-E/ML Datasheet HTML 49Page - Microchip Technology MCP3918A1-E/ML Datasheet HTML 50Page - Microchip Technology MCP3918A1-E/ML Datasheet HTML 51Page - Microchip Technology MCP3918A1-E/ML Datasheet HTML 52Page - Microchip Technology MCP3918A1-E/ML Datasheet HTML 53Page - Microchip Technology MCP3918A1-E/ML Datasheet HTML 54Page - Microchip Technology MCP3918A1-E/ML Datasheet HTML 55Page - Microchip Technology MCP3918A1-E/ML Datasheet HTML 56Page - Microchip Technology MCP3918A1-E/ML Datasheet HTML 57Page - Microchip Technology Next Button
Zoom Inzoom in Zoom Outzoom out
 53 / 88 page
background image
 2014 Microchip Technology Inc.
DS20005287A-page 53
MCP3918
6.12
Interface Mode Selection
(SPI or 2-Wire)
The MCP3918 includes two different digital interfaces:
a standard 4-wire half duplex SPI interface (see
Section 6.0 “SPI Serial Interface Description”
) and
a 2-wire interface dedicated for digitally isolated
applications (see Section 7.0 “2-Wire Serial Interface
Description”
).
The selection between these two interfaces is possible
only when the CLKEXT bit is high (CLKEXT = 1). This
is the case by default at POR. When the CLKEXT = 1
condition is true, the OSC2/MODE pin becomes the
selection input pin for the Interface mode.
When
OSC2/MODE
is
logic
low
during
the
CLKEXT = 1 condition, the SPI interface is selected.
When OSC2/MODE pin is logic high, the 2-Wire
Interface is selected (see Figure 1-5 for the 2-Wire
mode selection timing diagram).
If OSC2/MODE pin is left floating while CLKEXT = 1,
an
internal
pull-down
(35 µA
typical
current)
automatically selects the SPI mode as the default
interface.
The MODE selection is not combinatorial, it is latched
at each POR, Hard Reset and Watchdog Time Reset.
In other words, to change from one interface mode to
another, the user needs to create one of these three
resets and change the OSC2/MODE logic input state
before exiting the applied reset.



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88


데이터시트 다운로드

Go To PDF Page


링크 URL



ALLDATASHEET 가 귀하에 도움이 되셨나요?  [ DONATE ] 

Alldatasheet는?   |   광고문의   |   운영자에게 연락하기   |   개인정보취급방침   |   링크 투 데이터시트    |   링크교환   |   제조사별 검색
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com