©2016

DS20005029B

02/16

30

16 Mbit LPC Serial Flash

SST49LF016C

EOL Data Sheet

Electrical Specifications

The AC and DC specifications for the LPC interface signals (LAD[3:0], LFRAME#, LCLCK and RST#) as

defined in Section 4.2.2.4 of the PCI local Bus specification, Rev. 2.1. Refer to Table 22 for the DC voltage and

current specifications. Refer to Table 26 through Table 28 for the AC timing specifications for Clock, Read, Write,

and Reset operations.

Absolute Maximum Stress Ratings (Applied conditions greater than those listed under “Absolute

Maximum Stress Ratings” may cause permanent damage to the device. This is a stress rating only and

functional operation of the device at these conditions or conditions greater than those defined in the

operational sections of this data sheet is not implied. Exposure to absolute maximum stress rating con-

ditions may affect device reliability.)

Temperature Under Bias . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -55°C to +125°C

Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65°C to +150°C

1. Do not violate processor or chipset specification regarding INIT# voltage.

2. The maximum DC voltage on WP#/AAI pin may reach 11V for periods <20ns.

3. Excluding certain with-Pb 32-PLCC units, all packages are 260

Certain with-Pb 32-PLCC package types are capable of 240

information.

4. Outputs shorted for no more than one second. No more than one output shorted at a time.

Table 20: Operating Range

Range

Ambient Temp

Commercial

0°C to +70°C

3.0-3.6V

T20.1 20005029

1. See Figures 15 and 16

Input Rise/Fall Time

Output Load

3 ns

T21.1 20005029