MB95F613K datasheet(4/110 Pages) CYPRESS

4 / 110 page

Document Number: 002-04698 Rev. *A

Page 4 of 110

PRELIMINARY

MB95610H Series

1. Product Line-up

(Continued)

Part number

Parameter

MB95F613H

MB95F614H

MB95F616H

MB95F613K

MB95F614K

MB95F616K

Type

Flash memory product

Clock

supervisor counter

It supervises the main clock oscillation and the subclock oscillation.

Flash memory

capacity

12 Kbyte

20 Kbyte

36 Kbyte

12 Kbyte

20 Kbyte

36 Kbyte

RAM capacity

512 bytes

1024 bytes

512 bytes

1024 bytes

Power-on reset

Yes

Low-voltage

detection reset

Yes

Reset input

With dedicated reset input

Selected through software

CPU functions

• Number of basic instructions

: 136

• Instruction bit length

: 8 bits

• Instruction length

: 1 to 3 bytes

• Data bit length

: 1, 8 and 16 bits

• Minimum instruction execution time

: 61.5 ns (machine clock frequency = 16.25 MHz)

• Interrupt processing time

: 0.6 µs (machine clock frequency = 16.25 MHz)

General-purpose

I/O

• I/O port

: 40

• CMOS I/O

: 39

• N-ch open drain

: 1

• I/O port

: 41

• CMOS I/O

: 39

• N-ch open drain

: 2

Time-base timer

Interval time: 0.256 ms to 8.3 s (external clock frequency = 4 MHz)

Hardware/

software watchdog

timer

• Reset generation cycle

Main oscillation clock at 10 MHz: 105 ms (Min)

• The sub-CR clock can be used as the source clock of the software watchdog timer.

Wild register

It can be used to replace 3 bytes of data.

8/10-bit

A/D converter

4 channels

8-bit or 10-bit resolution can be selected.

8/16-bit

composite timer

2 channels

• The timer can be configured as an “8-bit timer × 2 channels” or a “16-bit timer × 1 channel”.

• It has the following functions: interval timer function, PWC function, PWM function and input capture function.

• Count clock: it can be selected from internal clocks (seven types) and external clocks.

• It can output square wave.

External interrupt

8 channels

• Interrupt by edge detection (The rising edge, falling edge, and both edges can be selected.)

• It can be used to wake up the device from different standby modes.

On-chip debug

• 1-wire serial control

• It supports serial writing (asynchronous mode).

MB95F613K 데이터시트(PDF) 4 Page - Cypress Semiconductor

MB95F613K 데이터시트(HTML) 4 Page - Cypress Semiconductor

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL