STM32F411RET6 datasheet(60/149 Pages) STMICROELECTRONICS

60 / 149 page

Electrical characteristics

STM32F411xC STM32F411xE

60/149

DocID026289 Rev 6

6.1.7

Current consumption measurement

Figure 18. Current consumption measurement scheme

6.2

Absolute maximum ratings

Stresses above the absolute maximum ratings listed in Table 11: Voltage characteristics,

Table 12: Current characteristics, and Table 13: Thermal characteristics may cause

permanent damage to the device. These are stress ratings only and functional operation of

the device at these conditions is not implied. Exposure to maximum rating conditions for

extended periods may affect device reliability.

Table 11. Voltage characteristics

Symbol

Ratings

Min

Max

Unit

VDD–VSS

External main supply voltage (including VDDA, VDD and

VBAT)(1)

1. All main power (VDD, VDDA) and ground (VSS, VSSA) pins must always be connected to the external power

supply, in the permitted range.

–0.3

4.0

VIN

Input voltage on FT and TC pins(2)

2. VIN maximum value must always be respected. Refer to Table 12 for the values of the maximum allowed

injected current.

VSS–0.3 VDD+4.0

Input voltage on any other pin

VSS–0.3

4.0

Input voltage for BOOT0

VSS

9.0

ΔVDDx|

Variations between different VDD power pins

|VSSX −VSS|

Variations between all the different ground pins

VESD(HBM)

Electrostatic discharge voltage (human body model)

see Section 6.3.14:

Absolute maximum

ratings (electrical

sensitivity)

STM32F411RET6 데이터시트(PDF) 60 Page - STMicroelectronics

STM32F411RET6 데이터시트(HTML) 60 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL