 |
전자부품 데이터시트 검색엔진 |
|
|
전자부품 데이터시트 검색엔진 |
|
STV2050A 데이터시트(PDF) 36 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STV2050A 데이터시트(HTML) 36 Page - STMicroelectronics |
|
|
36 / 83 page  36/83 STV2050A - VIDEO PATTERN GENERATOR Figure 18. Vertical Grid Adjustment If the VGP bit is programmed to 0, the grid starts with the first line following the two lines that are reserved for the register update procedure. The allowed range for the VGP is included between the 0 and 511 video lines. 7.3 CURSOR 7.3.1 Cursor Size The cursor is available in different shapes. The shape is selected by the PAS[3] cursor-type bit in the EA register. 7.3.2 Cursor Position The position of the cursor is determined by the most recent write command on the I²C bus. The embedded RAM addresses of dynamic convergence correction values correspond di- rectly to grid positions on the screen. They represent cursor positions as well. If the CPV (Cursor Position Vertical) value exceeds the 0...C(hex) range, the cursor is not dis- played. If a new write address is within the accepted grid range (after having exceeded the range), the cursor pattern is re-displayed (unless the cursor display is turned off). PAS[3] 0: Small Cursor 1: Large Cursor 12 0 1 2 3 4 5 6 visible screen area V-Retrace VGP+2 VGD |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Korean ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
