SLG46110V datasheet(4/82 Pages) DIALOG

4 / 82 page

000-0046110-106

Page 3 of 81

SLG46110

3.0 User Programmability

Non-volatile memory (NVM) is used to configure the SLG46110’s connection matrix routing and macrocells. The NVM is

One-Time-Programmable (OTP). However, Silego’s GreenPAK development tools can be used to configure the connection matrix

and macrocells, without programming the NVM, to allow on-chip emulation. This configuration will remain active on the device as

long as it remains powered and can be re-written as needed to facilitate rapid design changes.

When a design is ready for in-circuit testing, the same GreenPAK development tools can be used to program the NVM and create

samples for small quantity builds. Once the NVM is programmed, the device will retain this configuration for the duration of its

lifetime.

Once the design is finalized, the design file can be forwarded to Silego to integrate into the production process.

Figure 1. Steps to create a custom Silego GreenPAK device

Product

Definition

Customer creates their own design in

GreenPAK Designer

Program Engineering Samples with

GreenPAK Development Tools

Customer verifies GreenPAK

in system design

E-mail design file to

GreenPAK@silego.com

E-mail Product Idea, Definition, Drawing, or

Schematic to GreenPAK@silego.com

Silego Applications Engineers will review design

specifications with customer

Samples and Design & Characterization

Report sent to customer

Customer verifies GreenPAK design

Custom GreenPAK part

enters production

GreenPAK Design

approved in system test

GreenPAK Design

approved

GreenPAK Design

approved

Emulate design to verify behavior

SLG46110V 데이터시트(PDF) 4 Page - Dialog Semiconductor