STC89LE53RC datasheet(152/165 Pages) STC

152 / 165 page

Parameter Passing

A macro with parameters passed from the main program has the following modified format:

%*DEFINE

(macro_name (parameter_list)) (macro_body)

For example, if the following macro is defined,

%*DEFINE

(CMPA# (VALUE))

(CJNE

A, #%VALUE, $ + 3

)

then the macro call

%CMPA# (20H)

will expand to the following instruction in the .LST file:

CJNE

A, #20H, $ + 3

Although the 8051 does not have a "compare accumulator" instruction, one is easily created using the CJNE

instruction with "$+3" (the next instruction) as the destination for the conditional jump. The CMPA# mnemonic

may be easier to remember for many programmers. Besides, use of the macro unburdens the programmer from

remembering notational details, such as "$+3."

Let's develop another example. It would be nice if the 8051 had instructions such as

JUMP

IF ACCUMULATOR GREATER THAN X

JUMP

IF ACCUMULATOR GREATER THAN OR EQUAL TO X

JUMP

IF ACCUMULATOR LESS THAN X

JUMP

IF ACCUMULATOR LESS THAN OR EQUAL TO X

but it does not. These operations can be created using CJNE followed by JC or JNC, but the details are tricky.

Suppose, for example, it is desired to jump to the label GREATER_THAN if the accumulator contains an ASCII

code greater than "Z" (5AH). The following instruction sequence would work:

CJNE

A, #5BH, $÷3

JNC

GREATER_THAN

The CJNE instruction subtracts 5BH (i.e., "Z" + 1) from the content of A and sets or clears the carry flag

accordingly. CJNE leaves C=1 for accumulator values 00H up to and including 5AH. (Note: 5AH-5BH<0,

therefore C=1; but 5BH-5BH=0, therefore C=0.) Jumping to GREATER_THAN on the condition "not carry"

correctly jumps for accumulator values 5BH, 5CH, 5DH, and so on, up to FFH. Once details such as these are

worked out, they can be simplified by inventing an appropriate mnemonic, defining a macro, and using the macro

instead of the corresponding instruction sequence. Here's the definition for a "jump if greater than" macro:

%*DEFINE

(JGT (VALUE, LABEL))

(CJNE

A, #%VALUE+1, $+3

;JGT

JNC

%LABEL

)

To test if the accumulator contains an ASCII code greater than "Z," as just discussed,the macro would be called as

%JGT

('Z', GREATER_THAN)

ASM51 would expand this into

CJNE

A, #5BH, $+3

;JGT

JNC

GREATER_THAN

The JGT macro is an excellent example of a relevant and powerful use of macros. By using macros, the

programmer benefits by using a meaningful mnemonic and avoiding messy and potentially bug-ridden details.

152

STC89LE53RC 데이터시트(PDF) 152 Page - STCmicro Technology Co,.Ltd

STC89LE53RC 데이터시트(HTML) 152 Page - STCmicro Technology Co,.Ltd

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL