| 전자부품 데이터시트 검색엔진 |
|
GS3471 데이터시트(PDF) 67 Page - Semtech Corporation |
|
|
|||||||||||||||||||||||||||||
GS3471 데이터시트(HTML) 67 Page - Semtech Corporation |
|
67 / 179 page ![]() GS3471 Final Data Sheet Rev.4 PDS-060498 September 2017 67 of 179 Semtech www.semtech.com 4.19.3 Ancillary Data Checksum Error The GS3471 calculates checksums for all received ancillary data. These calculated checksums are compared with the received ancillary data checksum words. If a mismatch in the calculated and received checksums is detected, then a checksum error is indicated. When operating in HD mode, the device makes comparisons on both the Y and C channels separately. If an error condition in the Y channel is detected, the YCS_ERR_[2:1] bit in the ERROR_STAT_[2:1] register is set HIGH. If an error condition in the C channel is detected, the CCS_ERR_[2:1] bit in the ERROR_STAT_[2:1] register is set HIGH. When operating in 3G Level A mode, the device makes comparisons on both the Y (Data Stream 1) and C (Data Stream 2) channels separately. If an error condition in the Y channel is detected, the YCS_ERR_[2:1] bit in the ERROR_STAT_[2:1] register is set HIGH. If an error condition in the C channel is detected, the CCS_ERR_[2:1] bit in the ERROR_STAT_[2:1] register is set HIGH. When operating in 3G Level B mode, the device makes comparisons on both the Y channel and the C channel of both Link A and Link B. For Link A, if an error condition in the Y channel is detected, the YCS_ERR_[2:1] bit in the ERROR_STAT_1 register is set HIGH. If an error condition in the C channel is detected, the CCS_ERR_[2:1] bit in the ERROR_STAT_1 register is set LOW. For Link B, if an error condition in the Y channel is detected, the YCS_ERR_[2:1] bit in the ERROR_STAT_2 register is set HIGH. If an error condition in the C channel is detected, the CCS_ERR_[2:1] bit in the ERROR_STAT_2 register is set LOW. When operating in SD mode, only the YCS_ERR_[2:1] bit is set HIGH when checksum errors are detected. 4.20 Signal Processing 4.20.1 Audio De-Embedding Mode The GS3471 includes an integrated audio de-embedder which is active when the deserializer is configured for SMPTE mode unless disabled using the AUDIO_EN/DIS pin. In non-SMPTE modes, the audio de-embedder is powered down to reduce power consumption. All output pins are LOW when the de-embedder is powered down. For detailed description of this feature, refer to Section 4.21. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |