LPC47M14X datasheet(98/205 Pages) SMSC

98 / 205 page

SMSC DS – LPC47M14X

Page 98

Rev. 03/19/2001

6.11 SERIAL IRQ

The LPC47M14x supports the serial interrupt to transmit interrupt information to the host system. The serial interrupt

scheme adheres to the Serial IRQ Specification for PCI Systems, Version 6.0.

Timing Diagrams For SER_IRQ Cycle

A) Start Frame timing with source sampled a low pulse on IRQ1

SER_IRQ

PCI_CLK

Host Controller

IRQ1

Drive Source

None

IRQ0 FRAME IRQ1 FRAME

IRQ2 FRAME

None

START

START FRAME

Note:

H=Host Control; R=Recovery; T=Turn-Around; SL=Slave Control; S=Sample

Note 1: Start Frame pulse can be 4-8 clocks wide depending on the location of the device in the PCI bridge

hierarchy in a synchronous bridge design.

B) Stop Frame Timing with Host using 17 SER_IRQ sampling period

SER_IRQ

PCI_CLK

Host Controller

IRQ15

Driver

None

IRQ14

IRQ15

IOCHCK#

None

STOP

STOP FRAME

START

NEXT CYCLE

FRAME

Note:

H=Host Control; R=Recovery; T=Turn-Around; S=Sample; I=Idle

Note 1: The next SER_IRQ cycle’s Start Frame pulse may or may not start immediately after the turn-around clock

of the Stop Frame.

Note 2: There may be none, one or more Idle states during the Stop Frame.

Note 3: Stop pulse is 2 clocks wide for Quiet mode, 3 clocks wide for Continuous mode.

LPC47M14X 데이터시트(PDF) 98 Page - SMSC Corporation

LPC47M14X 데이터시트(HTML) 98 Page - SMSC Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL