AS3956 datasheet(32/107 Pages) AMSCO

32 / 107 page

Page 32

ams Datasheet

Document Feedback

[v1-11] 2018-Nov-14

AS3956 − Detailed Description

Fabrication Data FAB_CFG3

Figure 30:

Fabrication Data FAB_CFG3

Note(s):

1. This byte can be set only during production.

Reserved Bytes

The reserved bytes belong to reserved memory areas.

OTP Blocks

Write and Read Lock blocks are OTP (One Time Programmable).

This means that once they are set to 1, they cannot be set back

to 0. Since setting OTP bits is an irreversible operation, it is

strongly recommended to perform this operation in controlled

environment.

Lock Bits

The bits of byte 2 and 3 of block 02h represent the

field-programmable read-only locking mechanism called

“static lock bytes”. They are called static because their position

in memory is fixed.

When data memory is larger than 16 blocks (64 bytes), also

“dynamic lock bytes” are required. They are located starting at

address 7Ah (4kbit version). Block lock granularity is 1 block per

bit for the first 16 blocks, 2 blocks per bit for the remaining

blocks.

Lock bits are OTP, i.e. setting bits to 1b is an irreversible

operation. Bits at 0b can be set to 1b through a WRITE operation,

the result being a bit-wise OR with the current value.

Conf. Bit

Name

Default

Function

Note

uid_crc<7>

CRC value calculated on UID

uid_crc<6>

uid_crc<5>

uid_crc<4>

uid_crc<3>

uid_crc<2>

uid_crc<1>

uid_crc<0>

AS3956 데이터시트(PDF) 32 Page - ams AG

AS3956 데이터시트(HTML) 32 Page - ams AG

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL