| 전자부품 데이터시트 검색엔진 |
|
PC8374L 데이터시트(PDF) 103 Page - National Semiconductor (TI) |
|
|
|
|||||||||||||||||||||||||||||
PC8374L 데이터시트(HTML) 103 Page - National Semiconductor (TI) |
|
103 / 239 page ![]() 4.0 System Wake-Up Control (SWC) (Continued) Revision 1.1 103 www.national.com 4.4.7 General-Purpose Status 1 Register 3 (GPE1_STS_3) This register contains “child” events 24-31 of the GPE1_STS register. The status bits behave according to the Sticky Status Bit definition in the ACPI Specification (i.e., the bit is set when the level of the hardware signal is high and is only cleared by the software writing 1 to it). Power Well: VSB3 Location: Offset 0Bh Type: R/W1C 1 RI2_EVT_STS (RI2 Event Status). Indicates that a telephone ring signal was received at Serial Port 2 and the event was identified by the RI Wake-Up Detector. The bit is set by a high-to-low transition at the RI2 pin (see Section 4.2.1 on page 82). Writing 1 clears this bit; writing 0 is ignored. 0: Inactive since last cleared (default) 1: A telephone ring signal was received at Serial Port 2 0 Reserved. Bit 76543210 Name Reserved HM_STS MOD_IRQ _STS MS_IRQ _STS KBD_IRQ _STS Reserved Reset 00000000 Bit Description 7-6 Reserved. 5 HM_STS (HM Alarm Status). Is set if an event enabled for SCI generation was detected by the Health Management module. For the list of events and routing to SWC module (to the HM_STS bit) see “SCI and SMI Events Routing” in the “Events Notification” section. Writing 1 clears this bit; writing 0 is ignored. 0: Inactive since last cleared (default) 1: An enabled event was detected by the Health Management module 4 MOD_IRQ_STS (Modules IRQ Event Status). Indicates that an IRQ was generated by one of the Legacy modules (FDC, Parallel Port, Serial Ports 1 and 2, InfraRed Port), or Health Management module. The bit is set only if the IRQ is enabled for wake-up (bit 4 of the Standard configuration register at index 70h) and the related module is active; see Section 3.2.3 on page 39. Writing 1 clears this bit; writing 0 is ignored. 0: Inactive since last cleared (default) 1: An enabled IRQ (from one of the Legacy or Health Management modules) is active 3 MS_IRQ_STS (Mouse IRQ Event Status). Indicates that an IRQ was generated by the mouse interface section of the KBC module. The bit is set only if the IRQ is enabled for wake-up (bit 4 of the Mouse Logical Device configuration register at index 70h) and the KBC module is active (see Section 3.2.3 on page 39). Writing 1 clears this bit; writing 0 is ignored. 0: Inactive since last cleared (default) 1: An enabled IRQ from the mouse interface section of the KBC module is active 2 KBD_IRQ_STS (Keyboard IRQ Event Status). Indicates that an IRQ was generated by the keyboard interface section of the KBC module. The bit is set only if the IRQ is enabled for wake-up (bit 4 of the Keyboard Logical Device configuration register at index 70h) and the KBC module is active (see Section 3.2.3 on page 39). Writing 1 clears this bit; writing 0 is ignored. 0: Inactive since last cleared (default) 1: An enabled IRQ from the keyboard interface section of the KBC module is active 1-0 Reserved. Bit Description Winbond Electronics Corp. Advanced PC Product Center |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |