| 전자부품 데이터시트 검색엔진 |
|
L9966 데이터시트(PDF) 8 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
L9966 데이터시트(HTML) 8 Page - STMicroelectronics |
|
8 / 122 page ![]() 4 Input structure The L9966 hosts 15 different input channels. These channels can be connected to different types of external loads, such as switches, sensors or resistors. The input structure allows down to -3 V negative input voltage: • to withstand ground shifts between the ECU ground and the chassis ground where the input signal source is referenced to • limited to the SENT inputs, to withstand the RF noise without clamping effect that could distort the input signal. The input structure allows down to -30 V transient on the SENT IO[4:1] pins only if UBSW is no greater than 24 V max. The input protection uses a DPI (Direct Power Injection) filter to avoid rectifying effects in case of HF disturbance on the line. On the ECU, the input line must be equipped with a discrete ESD capacitor. The value of this capacitor is 6.8 nF. Exceptions to this are the SENT inputs (IO1/2/3/4 pins), because the SAE SENT standard allows max. 100 pF, with an additional 2.2 nF / 560 Ω RC combination. Therefore, SENT inputs have to be additionally protected by TVS (Transient Voltage Suppressor) on the ECU, if necessary. L9966 Input structure DS12459 - Rev 10 page 8/122 |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |