전자부품 데이터시트 검색엔진
  Korean  ▼
ALLDATASHEET.CO.KR

X  

AT25QL641 데이터시트(PDF) 48 Page - Renesas Technology Corp

부품명 AT25QL641
상세설명  SPI Serial Flash Memory with Dual I/O, Quad I/O, QPI Support
PDF  80 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
제조업체  RENESAS [Renesas Technology Corp]
홈페이지  http://www.renesas.com
Logo RENESAS - Renesas Technology Corp

AT25QL641 데이터시트(HTML) 48 Page - Renesas Technology Corp

Back Button AT25QL641 Datasheet HTML 44Page - Renesas Technology Corp AT25QL641 Datasheet HTML 45Page - Renesas Technology Corp AT25QL641 Datasheet HTML 46Page - Renesas Technology Corp AT25QL641 Datasheet HTML 47Page - Renesas Technology Corp AT25QL641 Datasheet HTML 48Page - Renesas Technology Corp AT25QL641 Datasheet HTML 49Page - Renesas Technology Corp AT25QL641 Datasheet HTML 50Page - Renesas Technology Corp AT25QL641 Datasheet HTML 51Page - Renesas Technology Corp AT25QL641 Datasheet HTML 52Page - Renesas Technology Corp Next Button
Zoom Inzoom in Zoom Outzoom out
 48 / 80 page
background image
DS-AT25QL641-130 Rev. G
Page 48
Sep 14, 2022
© 2022 Renesas Electronics
AT25QL641 Datasheet
Figure 44. Release Power-Down / Device ID Command (SPI Mode)
8.25 Read Manufacturer / Device ID I/O (90h)
The Read Manufacturer/ Device ID command provides both the JEDEC assigned manufacturer ID and the
specific device ID. This command can be issued in both SPI mode and QPI mode. In SPI mode, the 90h
command is called a 1-1-1 transfer, where the command, address, and data are all driven on a single pin (SI for
command and address, and SO for data). In QPI mode, the 90h command is called a 4-4-4 transfer, where the
command, address, and data are driven on the bidirectional IO0 - IO3 pins.
Note that in QPI mode, the following events must occur in this order:
1. Set the QE bit in Status Register-2
2. Execute the QPI Enable (38h) command
3. Execute the 90h command
In SPI mode, the operation is initiated by driving the CS pin low and then driving the command code 90h onto the
SI pin, followed by a 24-bit address (A23-A0) of 000000h. The 90h command requires 8 clocks to transfer, and
the 24-bit address requires 24 clocks to transfer. The Manufacturer ID for Renesas Electronics (1Fh) and the
Device ID (17h) are shifted out on the SO pin on the falling edge of SCK with most significant bit (MSB) first. A
minimum or 16 clocks are required to transfer the manufacturer and device ID information. If the
24-bit address is initially set to 000001h the Device ID is read first and then followed by the Manufacturer ID.
The Manufacturer and Device ID can be read continuously, alternating from one to the other. The command is
completed by driving CS high.
In QPI mode, the SI, SO, WP, and HOLD pins are configured as bidirectional pins IO0, IO1, IO2, and IO3
respectively. The 90h operation the operation is initiated by driving the CS pin low and then driving the command
code 90h onto the IO0 - IO3 pins, followed by a 24-bit address (A23-A0) of 000000h. The 90h command requires
2 clocks to transfer, and the 24-bit address requires 6 clocks to transfer. The Manufacturer ID for Renesas
Electronics (1Fh) and the Device ID (17h) are shifted out on the bidirectional IO0 - IO3 pins on the falling edge of
SCK, with most significant bit (MSB) first. A minimum or 4 clocks are required to transfer the
manufacturer and device ID information. If the 24-bit address is initially set to 000001h the Device ID is
read first and then followed by the Manufacturer ID. The Manufacturer and Device ID can be read continuously,
alternating from one to the other. The command is completed by driving CS high.
Figure 45 shows the 90h command as executed in SPI mode. In this mode the command and address are driven
on the SI pin.
35
246
7
29
31
30
32
34
33
35
37
38
36
9
8
23
22
2
1
0
01
Mode 3
Mode 0
Mode 3
Mode 0
t
RES2
Power-Down Current
Stand-By Current
High-Impedance
SCK
CS
Command (ABh)
3 Dummy Bytes
Device ID
76
5
43
2
10
MSB
SI
SO



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80


데이터시트 다운로드

Go To PDF Page


링크 URL



ALLDATASHEET 가 귀하에 도움이 되셨나요?  [ DONATE ] 

Alldatasheet는?   |   광고문의   |   운영자에게 연락하기   |   개인정보취급방침   |   링크 투 데이터시트    |   링크교환   |   제조사별 검색
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com