DSP56600FMSLASHAD datasheet(37/76 Pages) NXP

37 / 76 page

DSP56652

DSP56652 Signal Description

Preliminary

MOTOROLA

DSP56652 Technical Data Sheet

1-31

Serial Audio Codec Port

After reset, the default state of all serial audio codec pins is Hi-Z. For serial audio

codec port signals equipped with resistors, all pull-ups and pull-downs are

automatically disconnected when the pin is an output

Table 1-18

Serial Audio Codec Port Signals

Signal Name

Signal

Type

State

during

Reset

Signal Description

STDA

Input or

Output

Input

Audio codec transmit data

Ñ This output signal transmits serial

data from the audio codec serial transmitter shift register. It is

equipped with a 100k

W pull-up resistor.

This is a GPIO signal when STDA is not being used.

Note:

This signal is disabled if the alternate STDA function on

INT6 is selected. (See Table 1-12 on page 1-19.)

SRDA

Input or

Output

Input

Audio codec receive data

Ñ This input signal receives serial data

and transfers the data to the audio codec receive shift register. It is

equipped with a 100k

W pull-down resistor.

This is a GPIO signal when SRDA is not being used.

Note:

This signal is disabled if the alternate SRDA function on

INT7 is selected. (See Table 1-12 on page 1-19.)

SCKA

Input or

Output

Input

Audio codec serial clock

Ñ This bidirectional signal provides the

serial bit rate clock when only one clock is being used or the TxD

clock otherwise. It is equipped with a 100k

W pull-down resistor.

This is a GPIO signal when the serial audio codec port is not being

used.

Note:

This signal is disabled if the alternate SCKA function on

ROW7 is selected. (See Table 1-14 on page 1-22.)

SC0A

Input or

Output

Input

Audio codec serial clock 0Ñ

This signalÕs function is determined by

the SCLK mode.

Synchronous modeÑserial I/O flag 0

Asynchronous modeÑreceive clock I/O

This is a GPIO signal when SC0A is not being used.

SC1A

Input or

Output

Input

Audio codec serial clock 1Ñ

This signalÕs function is determined by

the SCLK mode.

Synchronous modeÑserial I/O flag 0

Asynchronous modeÑreceiver frame sync I/O

This is a GPIO signal when SC1A is not being used.

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

DSP56600FM/AD 데이터시트(PDF) 37 Page - NXP Semiconductors

DSP56600FM/AD 데이터시트(HTML) 37 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76

데이터시트 다운로드

링크 URL