DSP56600FMSLASHAD datasheet(43/76 Pages) NXP

43 / 76 page

Preliminary

MOTOROLA

DSP56652 Technical Data Sheet

2-1

SECTION

SPECIFICATIONS

GENERAL CHARACTERISTICS

The DSP56652 is fabricated in high-density CMOS. The DSP56652 specifications are

preliminary and are from design simulations, and may not be fully tested or

guaranteed at this early stage of the product life cycle. Finalized specifications will be

published after full characterization and device qualifications are complete.

MAXIMUM RATINGS

Note:

In the calculation of timing requirements, adding a maximum value of one

specification to a minimum value of another specification does not yield a

reasonable sum. A maximum specification is calculated using a worst case

variation of process parameter values in one direction. The minimum

specification is calculated using the worst case for the same parameters in the

opposite direction. Therefore, a ÒmaximumÓ value for a specification will

never occur in the same device that has a ÒminimumÓ value for another

specification; adding a maximum to a minimum represents a condition that

can never exist.

CAUTION

This device contains circuitry protecting

against damage due to high static voltage or

electrical fields; however, normal precautions

should be taken to avoid exceeding maximum

voltage ratings. Reliability is enhanced if

unused inputs are tied to an appropriate logic

voltage level (e.g., either GND or VCC).

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

DSP56600FM/AD 데이터시트(PDF) 43 Page - NXP Semiconductors