ARM720T datasheet(80/242 Pages) ETC2

부품명	ARM720T

상세설명	General-purpose 32-bit Microprocessor with 8KB cache, enlarged Write buffer, and Memory Management Unit (MMU) combined in a single chip

PDF	242 Pages

Scroll/Zoom	100%

제조업체	ETC2 [List of Unclassifed Manufacturers]

홈페이지

Logo

80 / 242 page

Write Buffer

5-2

ARM DDI 0192A

5.1

About the write buffer

The ARM720T write buffer is provided to improve system performance. It can buffer

up to eight words of data, and four independent addresses. It can be enabled or disabled

using the W bit, bit 3, in the ARM720T control register. The buffer is disabled and

flushed on reset.

The operation of the write buffer is further controlled by the Bufferable (B) bit, which

is stored in the MMU page tables. For this reason, the MMU must be enabled before

using the write buffer. The two functions can, however, be enabled simultaneously,

with a single write to the control register.

For a write to use the write buffer, both the W bit in the control register and the B bit in

the corresponding page table must be set.

Note

It is not possible to abort buffered writes externally. The BERROR pin is ignored.

Areas of memory that can generate aborts must be marked as unbufferable in the MMU

page tables.

5.1.1

Bufferable bit

This bit controls whether a write operation uses or does not use the write buffer.

Typically, main memory is bufferable and I/O space unbufferable. The B bit can be

configured for both pages and sections.

ARM720T 데이터시트(PDF) 80 Page - List of Unclassifed Manufacturers