| 전자부품 데이터시트 검색엔진 |
|
XRT86VL34 데이터시트(PDF) 45 Page - Exar Corporation |
|
|
|||||||||||||||||||||||||||||
XRT86VL34 데이터시트(HTML) 45 Page - Exar Corporation |
|
45 / 156 page ![]() XRT86VL34 40 REV. V1.2.0 QUAD T1/E1/J1 FRAMER/LIU COMBO - T1 REGISTER DESCRIPTION TABLE 26: PERFORMANCE REPORT CONTROL REGISTER (PRCR) HEX ADDRESS: 0Xn11D BIT FUNCTION TYPE DEFAULT DESCRIPTION-OPERATION 7 LBO_ADJ_ENB R/W 0 Transmit Line Build Out Auto Adjustment: This bit is used to enable or disable the transmit line build out auto adjustment feature. When the transmitter of the device is sending AIS condition, the transmit line build out will automatically be adjust to one setting lower if this feature is enabled. (Please refer to the EQC[4:0] bits in register 0x0Fn0 for different settings of Transmit Line Build Out). This feature is designed to for power saving pur- poses when an AIS signal is being transmitted. 1 - Enables the transmit line build out auto adjustment feature. 0 - Disables the transmit line build out auto adjustment feature. NOTE: This feature is only available for T1 short haul applications. 6 RLOS_OUT_ENB R/W 1 RLOS Output Enable: This bit is used to enable or disable the Receive LOS (RLOS_n) out- put pins. 0 - Disables the RLOS output pin. 1 - Enables the RLOS output pin. [5-3] Reserved - - Reserved. 2 C/R_BIt R/W 0 C/R Bit Control This bit allows user to control the value of C/R bit within an outgoing performance report. 0 - Outgoing C/R bit will be set to’0’ 1 - Outgoing C/R bit will be set to’1’ [1:0] APCR R/W 00 Automatic Performance Control/Response Report These bits automatically generates a summary report of the PMON status so that it can be inserted into an out going LAPD message. Automatic performance report can be generated every time these bits transition from ‘b00’ to ‘b01‘or automatically every one second. The table below describes the different APCR[1:0] bits settings. APCR[1:0] SOURCE FOR RECEIVE D/E TIMESLOTS 00/11 No performance report issued 01 Single performance report is issued when these bits transitions from ‘b00’ to b’01’. 10 Automatically issues a performance report every one second |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |