 2022 Microchip Technology Inc. and its subsidiaries

DS20006703A-page 3

EMC2101

1.0

ELECTRICAL CHARACTERISTICS

1.1

Electrical Specifications

Absolute Maximum Ratings(†)

Supply Voltage (VDD) ................................................................................................................................. -0.3V to +5.0V

Voltage on 5V tolerant pins (V5VT_pin).............................................................................................................-0.3 to 5.5V

Voltage on 5V tolerant pins (|V5VT_pin -VDD|) (Note) .....................................................................................-0.3 to 3.6V

Voltage on any other pin to Ground ..................................................................................................... -0.3 to VDD +0.3V

Operating Temperature Range....................................................................................................................-40 to +125°C

Storage Temperature Range.......................................................................................................................-55 to +150°C

Lead Temperature Range ........................................................................................... Refer to JEDEC Spec. J-STD-020

Package Thermal Characteristics for 8-pin MSOP

Thermal Resistance (θj-a).................................................................................................................................140.8°C/W

ESD Rating, All pins HBM.......................................................................................................................................2000V

Note:

For the 5V tolerant pins that have a pull-up resistor, the pull-up voltage must not exceed 3.6V when

EMC2101 is unpowered.

† NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the

device. This is a stress rating only and functional operation of the device at those or any other conditions above those

indicated in the operation listings of this specification is not implied. Exposure above maximum rating conditions for

extended periods may affect device reliability.

TABLE 1-1:

ELECTRICAL SPECIFICATIONS

Electrical Characteristics: Unless otherwise specified VDD = 3.0V to 3.6V, TA = 0°C to +85°C,

all typical values at TA = +27°C

Characteristic

Sym.

Min.

Typ.

Max.

Units

Conditions

DC Power

Supply Voltage

VDD

3.0

3.3

3.6

V

Supply Current

IDD

—

0.6

1

mA

16 conversion/second, PWM or DAC

driver operational

—

200

—

µA

1 conversion/16 seconds, PWM driver

operational

—

300

—

µA

1 conversion/16 seconds, DAC driver,

no load

—

300

400

µA

Temp monitoring disabled, DAC driver

enabled, no load

Standby Current

ISTANDBY

—

—

270

µA

PWM disabled, monitoring disabled

Internal Temperature Monitor

Temperature Accuracy

—

—

±1

±2

°C

Temperature

Resolution

—

—

±1

—

°C

8-bit resolution

Conversion Time

Internal Channel

tCONV

—3

—

ms