PWR-2700-DC-R datasheet(40/80 Pages) ARISTA

40 / 80 page

•

Console (Serial) Port: Connect to a PC with RJ-45 to DB-9 serial adapter cable. Default switch

settings include:

•

9600 baud

•

No flow control

•

1 stop bit

•

No parity bits

•

8 data bits

The DCS-7516-SUP supervisor cards must be installed in one of the two slots designated for them in

the DCS-7516N switch as shown in Figure 27: DCS 7516N Supervisor Slots.

Note: Do not insert a line card into either of the slots 1 and 2, designated for a supervisor card.

This could damage the modular switch. Slots for the line cards are numbered 3 through 18.

Figure 27: DCS 7516N Supervisor Slots

1 Supervisor slot 1

2 Supervisor slot 2

Table 9: RJ-45 to DB-9 Connections

RJ-45

DB-9

RJ-45

DB-9

RTS

CTS

GND

DTR

DSR

RXD

TXD

RXD

DSR

DTR

GND

CTS

RTS

•

Ethernet management port: Connect to 10/100/1000 management network with RJ-45 cable.

•

Connect to 10/100/1000 management network with RJ-45 cable.

•

USB Port: May be used for software or configuration updates.

•

Clock Input Port: Port type is MCX connector, 2-5.5V, 50 ohm termination.

PWR-2700-DC-R 데이터시트(PDF) 40 Page - Arista Networks, Inc

PWR-2700-DC-R 데이터시트(HTML) 40 Page - Arista Networks, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80

데이터시트 다운로드

링크 URL