TMP93CS44 datasheet(13/224 Pages) TOSHIBA

13 / 224 page

TMP93CS44/S45

2004-02-10

93CS44-11

3.1.2

AM8/ AM16 pin

(1) TMP93CS44

Set this pin to “H”. After reset, the CPU accesses the internal ROM with 16-bit bus

width. The bus width when the CPU accesses an external area is set by bus width/wait

control registers and the registers of port 1, which are described in section 3.6.3. (The

value of this pin is ignored and the value set by register is active.)

(2) TMP93CS45

1. With fixed 16-bit data bus external 16-bit data bus or 8-bit data bus is selectable

Set this pm to “L”. Port 1, AD8 to AD15 and A8 to A15 pins are fixed to AD8 to

AD15 functions. The values set in port 1 control register and port 1 function

The external data bus width is set by the bus width/wait control register which

is described in section 3.6.3.

It is necessary to set the program memory to be accessed to 16-bit data bus after

reset.

2. With fixed external 8-bit data bus

Set this pin to “H”. Port l, AD8 to AD15 and A8 to A15 pins are fixed to A8 to

A15 functions. The values set in port 1 control register and port 1 function register

are invalid.

The values of bit4 <B0BUS>, <B1BUS> and <B2BUS> in the bus width/wait

control register described in section 3.6.3 are invalid. The external 8-bit data bus

is fixed.

TMP93CS44 데이터시트(PDF) 13 Page - Toshiba Semiconductor