 |
전자부품 데이터시트 검색엔진 |
|
|
전자부품 데이터시트 검색엔진 |
|
L9679E 데이터시트(PDF) 97 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
L9679E 데이터시트(HTML) 97 Page - STMicroelectronics |
|
|
97 / 127 page  13 Electrical characteristics The GNDA pin is used as ground reference for the voltage measurements performed within the device, unless otherwise stated. All tables or parameters declared “Design Info” are not tested during production testing. 13.1 Operating supply range All electrical characteristics are valid for the following conditions unless otherwise noted: -40 °C ≤ Tamb ≤ +105 °C Table 17. Operating supply range Symbol Parameter Conditions / Comments Min Typ Max Unit VCC_3 VCC input voltage range Design Info 3.0 3.3 3.6 V VCC_5 VCC input voltage range Design Info 4.5 5 5.5 V VSAT VSAT input voltage range - 6.72 7.2 9.36 V VSYNC VSYNC input voltage range - 11.40 12 35 V IVCC_DISABLED VCC current consumption output disabled DC state w/o sensor loads; not considering running diagnostics, nor fault conditions. MISO_G, MISO_RS, FENL outputs disabled. - - 5 µA IVCC VCC current consumption output enabled DC state w/o sensor loads; not considering running diagnostics, nor fault conditions. MISO_G, MISO_RS, FENL outputs enabled. - - 5 mA IVSAT_NO_RSU VSAT current consumption NO RSU DC state with RSU channels DISABLED; not considering running diagnostics, nor fault conditions - - 25 mA IVSAT VSAT current consumption DC state with all RSU channels ENABLED but w/o sensor loads; not considering running diagnostics, nor fault conditions - - 41 mA IVSYNC_NO_RSU VSYNC current consumption NO RSU DC state with RSU channels DISABLED; not considering running diagnostics, nor fault conditions - - 0.5 mA IVSYNC VSYNC current consumption DC state with all RSU channels ENABLED but w/o sensor loads; not considering running diagnostics, nor fault conditions - - 3 mA IVSYNC_SLEEP VSYNC current consumption in OFF state VSAT ≤ VSAT_ON(min) - - 5 µA VSAT_OFF VSAT OFF threshold - 4.2 4.5 4.8 V VSAT_ON VSAT ON threshold - 5.0 5.25 5.5 V VSAT_OK_TH0 VSAT OK first threshold - 6.2 6.5 6.8 V VSAT_OK_TH1 VSAT OK second threshold - 7.7 8.1 8.5 V VSYNC_OKRISE VSYNC_OK threshold on VSYNC rising edge - 9 10 11 V VSYNC_OKFALL VSYNC_OK threshold on VSYNC falling edge - 8 9 10 V VSYNC_OKHYST VSYNC_OK threshold hysteresis - 0.6 - 1.2 V VTEST_TH TEST threshold Test go no go 10 12 14 V VTEST_HYST TEST hysteresis Design Info 0.2 0.4 0.5 V IPD_TEST TEST Pull Down VTEST ≤ 5 V 20 45 70 µA TVSAT_FILT VSAT filter time - 900 - 1150 µs L9679E Electrical characteristics DS12485 - Rev 8 page 97/127 |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Korean ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
