| 전자부품 데이터시트 검색엔진 |
|
GD32H757ZMT7 데이터시트(PDF) 79 Page - GigaDevice Semiconductor (Beijing) Inc. |
|
|
|||||||||||||||||||||||||||||
GD32H757ZMT7 데이터시트(HTML) 79 Page - GigaDevice Semiconductor (Beijing) Inc. |
|
79 / 151 page ![]() GD32H757xx Datasheet 78 The external memory controller EXMC, is used as a translator for CPU to access a variety of external memory, it automatically converts AXI memory access protocol into a specific memory access protocol defined in the configuration register, such as SRAM, ROM, NOR Flash, PSRAM, NAND Flash and SDRAM. The EXMC also can be configured to interface with the most common LCD module of Motorola 6800 and Intel 8080 series and reduce the system cost and complexity. 3.36. VREF Stable voltage, and product calibrated. Connects to VREFP pin to source off-chip circuits. 1.5V, 1.8V, 2.048V or 2.5V configurable reference voltage output. A precision internal reference circuit is inside. The internal voltage reference unit is used to provide voltage reference for ADC / DAC, or used by off-chip circuit connecting to VREFP pin. 3.37. Low power digital temperature sensor (LPDTS) The trigger source of measurement can be set to software or hardware. Programmable sampling time. Temperature window watchdog. The interrupt can be generated when the temperature is below a low threshold or above a high threshold and at the end of measurement. The generation of asynchronous wakeup signal in LXTAL mode indicates that the measurement result is higher or lower than the specified threshold. Low power digital tempearature sensor(LPDTS) is used to transmit square wave, which is converted by temperature and the frequency is proportional to the absolute temperature. The frequency measurement is based on the PCLK or the LXTAL clock. 3.38. Encoder Divided-Output controller (EDOUT) Support for changing the activation polarity of B. Support configuration of Z-phase output location and pulse width. Number of edges per rotation: 16 to 65536 (must be the multiple of four). Support for the input of update period event signals from the TRIGSEL. The encoder divided-output controller (EDOUT) is used to output location information obtained from the encoder in the form of A-phase, B-phase, and Z-phase pulses. 3.39. Controller area network (CAN) Supports CAN protocol version 2.0A/B. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |