ST52F510 datasheet(87/106 Pages) STMICROELECTRONICS

87 / 106 page

ST52F510/F513/F514

87/106

Acknowledge may be enabled and disabled via

software.

The I2C interface address and/or general call

address can be selected via software.

The speed of the I2C interface may be selected

between Standard (0-100KHz) and Fast I2C (100-

400KHz).

14.3.3 SDA/SCL Line Control.

Transmitter mode: the interface holds the clock line

low before transmission, in order to wait for the

microcontroller to write the byte in the Data

Receiver mode: the interface holds the clock line

low after reception to wait for the microcontroller to

read the byte in the Data Register.

SCL frequency is controlled by a programmable

clock divider which depends on the I2C bus mode.

When the I2C cell is enabled, the SDA and SCL

pins must be configured as floating open-drain I/O.

The value of the external pull-up resistance used

depends on the application.

14.4 Functional Description

By default the I2C interface operates in Slave

mode (M/SL bit is cleared) except when it initiates

a transmit or receive sequence.

First, the interface frequency must be configured

using

the

bits

the

Configuration

Registers.

14.4.1 Slave Mode.

As soon as a start condition is detected, the

address is received from the SDA line and sent to

the shift register; then it is compared with the

address of the interface or the General Call

address (if selected by software).

Figure 14.2 I2C Interface Block Diagram

DATA REGISTER

DATA SHIFT REGISTER

COMPARATOR

OWN ADDRESS REGISTER (OAR)

CLOCK CONTROL REGISTER (I2C_CCR)

STATUS REGISTER 1 (I2C_SR1)

CONTROL REGISTER (I2C_CR)

SDA

SCL

CONTROL LOGIC

STATUS REGISTER 2 (I2C_SR2)

INTERRUPT

CLOCK CONTROL

DATA CONTROL

SCL

SDA

ST52F510 데이터시트(PDF) 87 Page - STMicroelectronics

ST52F510 데이터시트(HTML) 87 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL