ST72260G datasheet(96/171 Pages) STMICROELECTRONICS

96 / 171 page

ST72260G, ST72262G, ST72264G

96/171

SERIAL COMMUNICATIONS INTERFACE (Cont’d)

DATA REGISTER (SCIDR)

Read/Write

Reset Value: Undefined

Contains the Received or Transmitted data char-

acter, depending on whether it is read from or writ-

ten to.

The Data register performs a double function (read

and write) since it is composed of two registers,

one for transmission (TDR) and one for reception

(RDR).

The TDR register provides the parallel interface

between the internal bus and the output shift reg-

ister (see Figure 54).

The RDR register provides the parallel interface

between the input shift register and the internal

bus (see Figure 54).

BAUD RATE REGISTER (SCIBRR)

Read/Write

Reset Value: 0000 0000 (00h)

Bits 7:6= SCP[1:0]

First SCI Prescaler

These 2 prescaling bits allow several standard

clock division ranges:

Bits 5:3 = SCT[2:0]

SCI Transmitter rate divisor

These 3 bits, in conjunction with the SCP1 & SCP0

bits define the total division applied to the bus

clock to yield the transmit rate clock in convention-

al Baud Rate Generator mode.

Bits 2:0 = SCR[2:0]

SCI Receiver rate divisor.

These 3 bits, in conjunction with the SCP[1:0] bits

define the total division applied to the bus clock to

yield the receive rate clock in conventional Baud

Rate Generator mode.

DR7

DR6

DR5

DR4

DR3

DR2

DR1

DR0

SCP1

SCP0

SCT2

SCT1

SCT0

SCR2

SCR1

SCR0

PR Prescaling factor

SCP1

SCP0

TR dividing factor

SCT2

SCT1

SCT0

128

RR Dividing factor

SCR2

SCR1

SCR0

128

ST72260G 데이터시트(PDF) 96 Page - STMicroelectronics

ST72260G 데이터시트(HTML) 96 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL