ST72260G datasheet(166/171 Pages) STMICROELECTRONICS

166 / 171 page

Rev. 2.3

August 2003

166/171

ERRATA SHEET

ST72264 LIMITATIONS AND CORRECTIONS

17 SILICON IDENTIFICATION

This document refers to ST72F264 devices and subsets (ST72F260, ST72F262).

They are identifiable:

On the device package, by the last letter of the Trace code marked on the device package

On the box, by the last 3 digits of the Internal Sales Type printed on the box label.

Table 32. Device Identification

18 REFERENCE SPECIFICATION

Limitations in this document are with reference to the ST72264 Datasheet Revision 1.7 (Au-

gust 2003).

19 SILICON LIMITATIONS

This section lists the known limitations of the devices referenced in Table 32.

19.1 EXECUTION OF BTJX INSTRUCTION

When testing the address $FF with the "BTJT" or "BTJF" instructions, the CPU may perform

an incorrect operation when the relative jump is negative and performs an address page

change.

To avoid this issue, including when using a C compiler, it is recommended to never use ad-

dress $00FF as a variable (using the linker parameter for example).

19.2 I/O PORT B AND C CONFIGURATION

When using an external quartz crystal or ceramic resonator, the fOSC2 clock may be disturbed

because the device goes into reserved mode controlled by Port B and C.

This happens with either one of the following configurations:

Trace Code marked on device

Internal Sales Type on box label

Flash Devices:

“xxxxxxxxxZ”

72F264xxxx$U2

72F264xxxx$A2

ST72260G 데이터시트(PDF) 166 Page - STMicroelectronics