| 전자부품 데이터시트 검색엔진 |
|
7733 데이터시트(PDF) 56 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
7733 데이터시트(HTML) 56 Page - Renesas Technology Corp |
|
56 / 940 page ![]() CENTRAL PROCESSING UNIT (CPU) 7733 Group User’s Manual 2–17 2.3.1 Banks The accessible area is divided by the 64 Kbytes. This 64-Kbyte area is called “bank.” The high-order 8 bits of an address, which consists of 24 bits, indicate the bank. A bank is specified by the program bank register (PG) or data bank register (DT). Each bank can be accessed efficiently by using an addressing mode where the data bank register (DT) is used. At each bank’s boundary, when an overflow occurs in the program counter (PC), the contents of the program bank register (PG) is incremented by 1; when a borrow occurs in the program counter (PC), the contents of the program bank register (PG) is decremented by 1. Accordingly, when normally programming, it is not necessary to give consideration to bank boundaries. 2.3.2 Direct page A 256-byte area specified by the direct page register (DPR) is called “direct page.” When setting a direct page, set the base address (the lowest address) of an area which is to be specified as a direct page to the direct page register (DPR). (Refer to section “2.1.8 Direct page register (DPR).”) By using a direct page addressing mode, a direct page can be accessed with less instruction cycles. 2.3 Accessible area |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |