| 전자부품 데이터시트 검색엔진 |
|
CDCE72010RGCT 데이터시트(PDF) 64 Page - Texas Instruments |
|
|
|
|||||||||||||||||||||||||||||
CDCE72010RGCT 데이터시트(HTML) 64 Page - Texas Instruments |
|
64 / 73 page ![]() Output Dividers Synchronization Reference Clock REG0<Bit4> VCXOSEL “1” “0” REG6<Bit5> DET_START_BYPASS REG6<Bit2> FB_DETERM_DIV_SEL “0” Feedback Divider Clock “1” Divide by 2 Feedback Clock Any of the Conditions will Produce a Conditional SYNC Start Signal: 1- REG9 <Bit11> INDET_BP is set to “0” & VCXO or AUX_CLK is available 2- REG9<Bit12> PLL_LOCK_BP is set to “0” & we have 1st Lock State 3- REG11<Bit19> PD_PLL is set to “0”& the PLL is ON 4- REG9<Bit13> LOW_FD_FB_EN is set to “1” N Divider Input Frequency above 600KHz 5- Write Activity to the Output Divider (s) 6- REG12<Bit8> Set to 1 ( /RESET Bit is Set to “1”) 7- REG12<Bit7> Set to 1 ( /Power Down Bit is Set to “1”) /RESET Pin “0” 1” REG9<Bit10> STARTBYPASS Feedback Clock “0” “1” OUTPUT DIVIDERS SYNC SIGNAL Synchronizing Output Divider SYNC Signal If the value of the bits described as inverted the function associated with it will be ignored with respect to the sync start signal generation. CDCE72010 SCAS858A – JUNE 2008 – REVISED JULY 2009.............................................................................................................................................................. www.ti.com The CDCE72010 is a 10 output clock device with 8 output dividers and to insure that all the outputs are synchronous a synchronization startup circuitry is used. The synchronization circuitry generates a pulse to reset all the dividers in a way, that a predictable synchronous output is generated. The Synchronization signal can be generated from different sources and can be synchronized to a specific clock. The Block diagram below illustrates the signal path of the Output Divider Sync Signal. This function is assured up to 500 MHz. NOTE: The minimum frequency required for the output synchronization block to work properly is 1 MHz. Figure 30. Output Divider Synchronization Block Diagram 64 Submit Documentation Feedback Copyright © 2008–2009, Texas Instruments Incorporated Product Folder Link(s): CDCE72010 |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |