MC68HC705P9CS datasheet(112/160 Pages) FREESCALE

112 / 160 page

Timer

Technical Data

MC68HC705P9 — Rev. 4.0

112

Timer

MOTOROLA

9.7.3 Timer Registers

The read-only timer registers (TRH and TRL) contain the current high

and low bytes of the 16-bit counter. Reading TRH before reading TRL

causes TRL to be latched until TRL is read. Reading TRL after reading

the timer status register clears the timer overflow flag (TOF). Writing to

the timer registers has no effect.

Reading TRH returns the current value of the high byte of the counter

and causes the low byte to be latched into a buffer. The buffer value

remains fixed even if the high byte is read more than once. Reading TRL

reads the transparent low byte buffer and completes the read sequence

of the timer registers.

Figure 9-13. Timer Register Reads

NOTE:

To prevent interrupts from occurring between readings of TRH and TRL,

set the interrupt mask (I bit) in the condition code register before reading

TRH, and clear the mask after reading TRL.

$0018

Bit 7

54321

Bit 0

Read:

Bit 15

Bit 8

Write:

Reset:

Reset initializes TRH to $FF

$0019

Bit 7

54321

Bit 0

Read:

Bit 7

54321

Bit 0

Write:

Reset:

Reset initializes TRL to $FC

= Unimplemented

Figure 9-12. Timer Registers (TRH and TRL)

TRH ($0018)

TRL ($0019)

BUFFER

INTERNAL

DATA BUS

READ TRH

LATCH

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

MC68HC705P9CS 데이터시트(PDF) 112 Page - Freescale Semiconductor, Inc

MC68HC705P9CS 데이터시트(HTML) 112 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL