 |
전자부품 데이터시트 검색엔진 |
|
|
전자부품 데이터시트 검색엔진 |
|
ADP1046ACPZ-R7 데이터시트(PDF) 40 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
ADP1046ACPZ-R7 데이터시트(HTML) 40 Page - Analog Devices |
|
|
40 / 96 page  ADP1046 Data Sheet Rev. 0 | Page 40 of 96 Invalid or Unsupported Command Code If an invalid or unsupported command code is sent to the I2C slave, the I2C slave considers this a data content fault and responds as follows: • NACKs the illegal/unsupported command byte and data bytes • Flushes and ignores the received command and data Reserved Bits Accesses to reserved bits are not a fault. Writes to reserved bits are ignored, and reads from reserved bits return undefined data. Write to Read-Only Commands If a host performs a write to a read-only command, the I2C slave considers this a data content fault and responds as follows: • NACKs all unexpected data bytes as they are received • Flushes and ignores the received command and data Note that this is the same error described in the Host Sends Too Many Bytes section. Read from Write-Only Commands If a host performs a read from a write-only command, the I2C slave considers this a data content fault and send all 1s (0xFF) as long as the host continues to request data. Note that this is the same error described in the Host Reads Too Many Bytes section. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Korean ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
