SPC564L54L5 datasheet(157/160 Pages) STMICROELECTRONICS

157 / 160 page

SPC56XL60/54

Revision history

Doc ID 15457 Rev 8

157/160

01-Aug-2012

(cont.)

–In Section 1.5.31, “eTimer module” changed text from “The MPC5643L

provides three eTimer modules on the 257 MAPBGA device, and two eTimer

modules on the 144 LQFP package” to “The MPC5643L provides three

eTimer modules (on the LQFP package eTimer_2 is available internally only

without any external I/O access)”.

–In Section 3.5, “Electromagnetic Interference (EMI) characteristics”,added

additional information at the end of this section.

–In Section 3.8, Voltage regulator electrical characteristics, added text related

to external ballast transistor.

–In Table 4 and Table 5 (LFBGA257 pin function summary), moved EVTI from

output function to input function.

–In Table 7 (System pins), changed the direction for EXTAL from “Output

Only” to “Input/Output”.

–InTable 7, added table footnote for symbol “EXTAL”.

– Changed the row (TVdd) in Table 9 (Absolute maximum ratings).

–In Table 9, Maximum value for “VDD_HV_IOX” and “VDD_HV_FLA” changed from

“3.6” to “4.0”.

–In Table 21 (Current consumption characteristics), added max value 250 and

290 mA for symbol IDD_LV_BIST+IDD_LV_PLL .

– Added five additional RunIDD parameters in Table 21 (Current consumption

characteristics).

–In Table 22 (Temperature sensor electrical characteristics), changed

condition for parameter “Accuracy” from “-40°C to 25°C” to “-40°C to 150°C”

–In Table 24 (FMPLL electrical characteristics),added ‘150’ to the max value

for ‘fSCM’ In Table 25 (RC oscillator electrical characteristics),changes done

are:

fRC symbol- Added min value ‘15.04’ and max value ‘16.96’.Removed condition

“TJ=25°C”

Removed row containing

RCMVAR symbol.

–In Figure 9, added the name ‘CS’ to the capacitor in the internal circuit

scheme.

– Removed references to Cut1 and Cut2:

Renamed Section ”Electromagnetic Interference (EMI) characteristics (cut1)” to

“Electromagnetic Interference (EMI) characteristics” .

In Table 26 (ADC conversion characteristics), removed reference to cut2 only

for symbol ‘IS1WINJ’ and ‘TUEIS1WWINJ’.

In Section 1.1, Document overview, modified text to remove references to

‘Cut1’.

–In Table 26 (ADC conversion characteristics), for tCONV added ‘60 MHz’ to

‘conditions’ and ‘600’ to the ‘Min’ value.

Separated SNR into two specifications with conditions Vref 3.3 V and 5.0 V

respectively.

Table 44.

Document revision history (continued)

Date

Revision

Changes

SPC564L54L5 데이터시트(PDF) 157 Page - STMicroelectronics

SPC564L54L5 데이터시트(HTML) 157 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL