SPEAR1310 datasheet(14/57 Pages) STMICROELECTRONICS

14 / 57 page

Reset and clock generator (RCG)

SPEAr1310

14/57

Doc ID 17528 Rev 4

Reset and clock generator (RCG)

The reset and clock generator (RCG) provides the system clocks and resets. It is highly

configurable through the miscellaneous registers.

5.1

Main features

●

Three main clock sources:

–

osci1: 24 MHz clock coming from internal oscillator connected to external quartz.

–

osci2: 32 kHz clock coming from internal oscillator used for RTC block (optional)

–

osci3: 25/100 MHz clock coming from MIPHY macro (optional).

●

Three programmable dithered PLLs (to reduce EMI):

–

PLL1: primarily used to generate the 1 GHz clock for the AMBA subsystem

–

PLL2, PLL3: primarily used to generate clocks for RAS logic and generic IPs

●

Seven configurable clock generators:

–

SSCG1-4: dedicated to RAS logic

–

SSCG5: for CLCD clock

–

SSCG6: for EXPI clock

–

SSCG7: for AMBA system clocks

●

Three operating modes for AMBA clocks:

–

DOZE: the clock source is osci2 (osci1 after power on)

–

SLOW: the clock source is the osci1 or a divided version

–

NORMAL: the clock source is PLL1 (by default), PLL2, PLL3 or SSCG7

●

Configurable clock gating and software reset for most peripherals

●

Global software reset and watchdog reset

SPEAR1310 데이터시트(PDF) 14 Page - STMicroelectronics

SPEAR1310 데이터시트(HTML) 14 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57

데이터시트 다운로드

링크 URL