| 전자부품 데이터시트 검색엔진 |
|
WM8940CGEFL/V 데이터시트(PDF) 46 Page - Wolfson Microelectronics plc |
|
|
|||||||||||||||||||||||||||||
WM8940CGEFL/V 데이터시트(HTML) 46 Page - Wolfson Microelectronics plc |
|
46 / 91 page ![]() WM8940 Production Data w PD, Rev 4.3, November 2011 46 REGISTER ADDRESS BIT LABEL DEFAULT DESCRIPTION 3:0 LIMBOOST 0000 Limiter volume boost (can be used as a stand alone volume boost when LIMEN=0): 0000 = 0dB 0001 = +1dB 0010 = +2dB 0011 = +3dB 0100 = +4dB 0101 = +5dB 0110 = +6dB 0111 = +7dB 1000 = +8dB 1001 = +9dB 1010 = +10dB 1011 = +11dB 1100 = +12dB 1101 to 1111 = reserved Table 33 DAC Digital Limiter Control ANALOGUE OUTPUTS The WM8940 has a single MONO output and two outputs SPKOUTP and SPOUTN for driving a mono BTL speaker. These analogue output stages are supplied from SPKVDD and are capable of driving up to 1V rms signals. SPKOUTP/SPKOUTN OUTPUTS The SPKOUT pins can drive a single bridge tied 8Ω speaker or two headphone loads of 16 or 32 or a line output (see Headphone Output and Line Output sections, respectively). The signal to be output on SKPKOUT comes from the Speaker Mixer circuit and can be any combination of the DAC output, the Bypass path (output of the boost stage) and the AUX input. The SPKOUTP/N volume is controlled by the SPKVOL register bits. Note that gains over 0dB may cause clipping if the signal is large. The SPKMUTE register bit causes the speaker outputs to be muted (the output DC level is driven out). The output pins remains at the same DC level (VMIDOP), so that no click noise is produced when muting or un-muting. The SPKOUTN pin always drives out an inverted version of the SPKOUTP signal. REGISTER ADDRESS BIT LABEL DEFAULT DESCRIPTION R50 Speaker mixer control 5 AUX2SPK 0 Output of auxiliary amplifier to speaker mixer input 0 = not selected 1 = selected 1 BYP2SPK 0 Bypass path (output of input boost stage) to speaker mixer input 0 = not selected 1 = selected 0 DAC2SPK 0 Output of DAC to speaker mixer input 0 = not selected 1 = selected R54 Bypass path attenuation control 8 SPKATTN 0 Attenuation control for bypass path (output of input boost stage) to speaker mixer input 0 = 0dB 1 = -10dB Table 34 Speaker Mixer Control |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |