MPC8349EVVALDB datasheet(33/87 Pages) FREESCALE

33 / 87 page

MPC8349EA PowerQUICC II Pro Integrated Host Processor Hardware Specifications, Rev. 13

Freescale Semiconductor

Ethernet: Three-Speed Ethernet, MII Management

Figure 17 shows the MII management AC timing diagram.

Figure 17. MII Management Interface Timing Diagram

MDC fall time

tMDHF

—

Notes:

1. The symbols for timing specifications follow the pattern of t(first two letters of functional block)(signal)(state)(reference)(state) for inputs

and t(first two letters of functional block)(reference)(state)(signal)(state) for outputs. For example, tMDKHDX symbolizes management data

timing (MD) for the time tMDC from clock reference (K) high (H) until data outputs (D) are invalid (X) or data hold time. Also,

tMDDVKH symbolizes management data timing (MD) with respect to the time data input signals (D) reach the valid state (V)

relative to the tMDC clock reference (K) going to the high (H) state or setup time. For rise and fall times, the latter convention

is used with the appropriate letter: R (rise) or F (fall).

2. This parameter is dependent on the csb_clk speed (that is, for a csb_clk of 267 MHz, the maximum frequency is 8.3 MHz

and the minimum frequency is 1.2 MHz; for a csb_clk of 375 MHz, the maximum frequency is 11.7 MHz and the minimum

frequency is 1.7 MHz).

3. This parameter is dependent on the csb_clk speed (that is, for a csb_clk of 267 MHz, the delay is 70 ns and for a csb_clk of

333 MHz, the delay is 58 ns).

Table 34. MII Management AC Timing Specifications (continued)

At recommended operating conditions with LVDD is 3.3 V ± 10% or 2.5 V ± 5%.

Parameter/Condition

Symbol1

Min

Typ

Max

Unit

Notes

MDC

tMDDXKH

tMDC

tMDCH

tMDCR

tMDCF

tMDDVKH

tMDKHDX

MDIO

(Input)

(Output)

MPC8349EVVALDB 데이터시트(PDF) 33 Page - Freescale Semiconductor, Inc