STM32F217VG datasheet(67/175 Pages) STMICROELECTRONICS

67 / 175 page

DocID17050 Rev 9

67/175

STM32F21xxx

Electrical characteristics

174

6.1.7

Current consumption measurement

Figure 18. Current consumption measurement scheme

6.2

Absolute maximum ratings

Stresses above the absolute maximum ratings listed in Table 10: Voltage characteristics,

Table 11: Current characteristics, and Table 12: Thermal characteristics may cause

permanent damage to the device. These are stress ratings only and functional operation of

the device at these conditions is not implied. Exposure to maximum rating conditions for

extended periods may affect device reliability.

ai14126

VBAT

VDD

VDDA

IDD_VBAT

IDD

Table 10. Voltage characteristics

Symbol

Ratings

Min

Max

Unit

VDD–VSS

External main supply voltage (including VDDA, VDD)(1)

1. All main power (VDD, VDDA) and ground (VSS, VSSA) pins must always be connected to the external power

supply, in the permitted range.

–0.3

4.0

VIN

Input voltage on five-volt tolerant pin(2)

2. VIN maximum value must always be respected. Refer to Table 11 for the values of the maximum allowed

injected current.

VSS–0.3

VDD+4

Input voltage on any other pin

VSS–0.3

4.0

ΔVDDx|

Variations between different VDD power pins

|VSSX − VSS| Variations between all the different ground pins

VESD(HBM)

Electrostatic discharge voltage (human body model)

see Section 6.3.14:

Absolute maximum

ratings (electrical

sensitivity)

STM32F217VG 데이터시트(PDF) 67 Page - STMicroelectronics

STM32F217VG 데이터시트(HTML) 67 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL