UM1634 datasheet(25/43 Pages) STMICROELECTRONICS

25 / 43 page

DocID024601 Rev 3

25/43

UM1634

API specification

Return values

Comments

This function resumes one operation if there is any operation is suspended. For instance, if

a program operation is in suspended state, it is resumed. If an erase operation is in

suspended state, it is resumed too. If an erase-suspended program operation is in

suspended state, the program operation is resumed prior to resuming the erase operation. It

is better to call this function based on suspendFlag returned from ‘FlashSupend()’.

Following table defines and describes various resume states and associated resume codes.

Assumptions

It assumes that the Flash block is initialized using a ‘FlashInit()’ API.

3.6.9

GetLock()

Description

The 'GetLock()' API checks the block locking status of Shadow/Low/Middle/High address

spaces in the C90FL module.

Prototype

UINT32 GetLock (PSSD_CONFIG pSSDConfig,

UINT8 blkLockIndicator,

BOOL *blkLockEnabled,

UINT32 *blkLockState);

Table 26. Return values for FlashResume()

Return Values

Possible Causes

Solution

C90FL_OK

Successful completion.

Table 27. resumeState definitions

Code name

Value

Description

RES_NOTHING

No program/erase operation to be resumed

RES_PGM

A program operation is resumed

RES_ERS

A erase operation is resumed

RES_ERS_PGM

A suspended erase-suspended program operation is

resumed

UM1634 데이터시트(PDF) 25 Page - STMicroelectronics

UM1634 데이터시트(HTML) 25 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43

데이터시트 다운로드

링크 URL