AN3985 datasheet(83/105 Pages) STMICROELECTRONICS

83 / 105 page

AN3985

M24LRxx layer

Doc ID 022255 Rev 2

83/105

M24LRxx_SetRst_EH_en function

This function sends, through the CR95HF, a SetRst_EH_en command to a contactless tag

in the field. On receiving the set reset Energy Harvesting Enable command, the M24LRxxE-R

contactless tag set or reset the EHenable bit, within the volatile control register.

M24LRxx_Check_EH_En function

This function sends, through the CR95HF, a Check_EH_En command to a contactless tag

in the field. On receiving the Check Energy Harvesting enabled command, the M24LRxxE-R

contactless tag reads the control register and sends back its value.

Table 141.

M24LRxx_SetRst_EH_en function description

Prototype

u8 M24LRxx_SetRst_EH_en (ISO15693_Tag* MyTag,

const u8

Request_flags,const u8* Tag_UID, u8 Set_Reset);

Input parameter

Request_flags: Specifies the actions to be performed by the contactless tag

and whether corresponding fields are present or not. (1)

Tag_UID: pointer on the UID (optional)

Set_Reset: Enable or disable the energy harvesting. (2)

The Address flag indicates if Tag_UID field will be added to the command (addressed mode).

Value to enable the energy harvesting: M24LRxx_CONTROL_BYTE_EH_ENABLE

Value to disable the energy harvesting: M24LRxx_CONTROL_BYTE_EH_DISABLE

Output parameter

MyTag: pointer on the structure that contains the tag response

Return parameter

M24LRxx_ERROR_CODE: The command failed.

M24LRxx_ERROR_PARAMETERS_REQUEST_FLAGS: The inventory flag is

set.

M24LRxx_SUCCESS_CODE: The tag answered the command.

Table 142.

M24LRxx_Check_EH_En function description

Prototype

u8 M24LRxx_Check_EH_En (ISO15693_Tag* MyTag,

const u8

Request_flags,const u8* Tag_UID);

Input parameter

Request_flags: Specifies the actions to be performed by the contactless tag

and whether corresponding fields are present or not. (1)

Tag_UID: pointer on the UID (optional)

The Address flag indicates if Tag_UID field will be added to the command (addressed mode).

Output parameter

MyTag: pointer on the structure that contains the tag response

Return parameter

M24LRxx_ERROR_CODE: The command failed.

M24LRxx_ERROR_PARAMETERS_REQUEST_FLAGS: The inventory flag is

set.

M24LRxx_SUCCESS_CODE: The tag answered the command.

AN3985 데이터시트(PDF) 83 Page - STMicroelectronics

AN3985 데이터시트(HTML) 83 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL