 |
전자부품 데이터시트 검색엔진 |
|
|
전자부품 데이터시트 검색엔진 |
|
RM0312 데이터시트(PDF) 250 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
RM0312 데이터시트(HTML) 250 Page - STMicroelectronics |
|
|
250 / 275 page  ProxSense™ (PXS) RM0312 250/275 DocID022352 Rev 3 22 ProxSense™ (PXS) 22.1 Introduction The ProxSense peripheral measures a capacitance variation so that applications can detect the proximity or touch of one or more conductive objects when the electrodes are connected to the PXS pins. This peripheral operates in Projected mode which is used to measure the charge transferred by a driven electrode to a second electrode. Note: ProxSense ™ is a trademark of Azoteq (Pty) Ltd. 22.2 Main features of the ProxSense peripheral • 10 independent receiver channels, allowing 10 measurements to be performed in parallel. • Each of the 10 receiver channels can be associated with two different pins, effectively allowing an application to have up to 20 receiver channels. • Each receiver channel can be independently configured to perform projected capacitance measurements. • The size of each CS capacitor can be independently configured with 5 bits of resolution. • The size of each electrode parasitic capacitance compensation (EPCC) capacitor can be independently configured with 8 bits of resolution. • The launch of each conversion can be synchronized with an external input, allowing for very precise measurements in the presence of cyclic disturbances (such as 50 Hz/60 Hz power-supply circuits). • End of conversion interrupt, which has an associated interrupt flag, and can wake the CPU from Active-halt mode. • First channel completion interrupt, which has an associated interrupt flag, and can wake the CPU from Active-halt mode after the first channel has finished its measurement. • The frequency of the clock driving the charge transfer protocol (based on HSI_PXS) can be scaled from 125 kHz up to 16 MHz. • The duration of the UP and PASS phases can be configured independently to optimize acquisition frequency. • The noise detection feature, when enabled, indicates if there was noise during a previous conversion. • Response time can be enhanced by specifying a maximum conversion measurement value, which is mainly useful for touchkey applications. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Korean ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
