ST7FOXU0 datasheet(24/123 Pages) STMICROELECTRONICS

24 / 123 page

Central processing unit

ST7FOXU0

24/123

Since the stack is 64 bytes deep, the 10 most significant bits are forced by hardware.

Following an MCU Reset, or after a Reset Stack Pointer instruction (RSP), the Stack Pointer

contains its reset value (the SP5 to SP0 bits are set) which is the stack higher address.

The least significant byte of the Stack Pointer (called S) can be directly accessed by a LD

instruction.

Note:

When the lower limit is exceeded, the Stack Pointer wraps around to the stack upper limit,

without indicating the stack overflow. The previously stored information is then overwritten

and therefore lost. The stack also wraps in case of an underflow.

The stack is used to save the return address during a subroutine call and the CPU context

during an interrupt. The user may also directly manipulate the stack by means of the PUSH

and POP instructions. In the case of an interrupt, the PCL is stored at the first location

pointed to by the SP. Then the other registers are stored in the next locations as shown in

Figure 6.

●

When an interrupt is received, the SP is decremented and the context is pushed on the

stack.

●

On return from interrupt, the SP is incremented and the context is popped from the

stack.

A subroutine call occupies two locations and an interrupt five locations in the stack area.

Figure 6.

ST7FOXU0 stack manipulation example

PCH

PCL

PCH

PCL

PCH

PCL

PCH

PCL

PCH

PCL

CALL

Subroutine

Interrupt

Event

PUSH Y

POP Y

IRET

RET

or RSP

@ 00FFh

@ 00C0h

Stack Higher Address = 00FFh

Stack Lower Address = 00C0h

ST7FOXU0 데이터시트(PDF) 24 Page - STMicroelectronics

ST7FOXU0 데이터시트(HTML) 24 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL