L9634

30/36

4.34 Monitor Mode

Monitor Mode message is defined as shown in below:

Table 26. MOSI Monitor Mode Message Definition

Odd parity check includes all 16 bits. "Don't care" bit is included in the parity check as well.

When bit D12 is set to a '0,' OSD ignores all command bits, specified in bit D9 to bit D0.

The monitor mode message is allowed to start or to stop the short between loops test. To start the test,

both bit D9 and bit D8 has to be set to '1.' To stop the test, bit D9 is set to '1' and bit D8 is set to '0.' If bit

D9 is set to '0,' OSD ignores the state of bit D8. In this condition, OSD does not affect the test. If bit D12

is set to '0,' OSD ignores bit D9 and bit D8.

Bit D7 through bit D0 is used to clear/keep the deploy success flag. When these bits are set to '1,' the flag

is cleared. Otherwise, OSD does not affect the state of these flags.

Bit

State

Description

D15

1

Mode Bits

D14

1

D13

Odd Parity

D12

0

Read Status Response Only

1

Write Commands

D11

-

Don’t Care

D10

-

Don’t Care

D9

0

Do not modify Short Between Loops Test

1

Modify Short Between Loops Test

D8

0

Disable Short Between Loops Test

1

Enable Short Between Loops Test

D7

0

Keep Deploy Success Flag Channel 7

1

Clear Deploy Success Flag Channel 7

D6

0

Keep Deploy Success Flag Channel 6

1

Clear Deploy Success Flag Channel 6

D5

0

Keep Deploy Success Flag Channel 5

1

Clear Deploy Success Flag Channel 5

D4

0

Keep Deploy Success Flag Channel 4

1

Clear Deploy Success Flag Channel 4

D3

0

Keep Deploy Success Flag Channel 3

1

Clear Deploy Success Flag Channel 3

D2

0

Keep Deploy Success Flag Channel 2

1

Clear Deploy Success Flag Channel 2

D1

0

Keep Deploy Success Flag Channel 1

1

Clear Deploy Success Flag Channel 1

D0

0

Keep Deploy Success Flag Channel 0

1

Clear Deploy Success Flag Channel 0

Obsolete

Product(s)

- Obsolete

Product(s)