| 전자부품 데이터시트 검색엔진 |
|
CS8952 데이터시트(PDF) 33 Page - Cirrus Logic |
|
|
|||||||||||||||||||||||||||||
CS8952 데이터시트(HTML) 33 Page - Cirrus Logic |
|
33 / 82 page ![]() CS8952 CrystalLAN™ 100BASE-X and 10BASE-T Transceiver 33 9 Restart Auto-Neg Read/Set 0 Setting this bit causes auto-negotiation to be restarted. It is an Act-Once bit which is cleared once auto-negotiation has begun. Clearing this bit has no effect on the auto-negotiation process. 8 Duplex Mode R/W If auto-negotiation is enabled via the AN[1:0] pins, reset to 0; otherwise, reset to 1 When bit 12 is clear, this bit controls the Full- Duplex/Half-Duplex operation of the part. When set, the part is configured for Full-Duplex operation, and when clear the part is configured for Half Duplex operation. The setting of this bit is superseded by auto-negotiation, and thus has no effect if bit 12 is set. 7 Collision Test R/W 0 When set, the COL pin will be asserted within 10 bit times in response to the assertion of TX_EN. Upon the deassertion of TX_EN, COL will be deasserted within 4 bit times. When Collision Test is clear, COL functions normally. 6:0 Reserved Read Only 000 0000 BIT NAME TYPE RESET DESCRIPTION |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |