| 전자부품 데이터시트 검색엔진 |
|
ATPL00B 데이터시트(PDF) 33 Page - ATMEL Corporation |
|
|
|||||||||||||||||||||||||||||
ATPL00B 데이터시트(HTML) 33 Page - ATMEL Corporation |
|
33 / 152 page ![]() Atmel ATPL00B [datasheet] 43028A-ATPL - 9/12 33 4.4.5 Data Transfer Instructions Internal RAM Table 4-5 shows the menu of instructions that are available for moving data around within the internal memory spaces, and the addressing modes that can be used with each one. All of these instructions are executed in 1 mc. Table 4-5. Data Transfer Instructions that Access Internal Data Memory Space MNEMONIC OPERATION ADDRESSING MODES EXE CUTI ON DIR IND REG IMM TIME (mc) MOV A,<src> A = <src> X X X X 1 MOV <dest>,A <dest> = A X X X 1 MOV <dest>,<src> <dest> = <src> X X X X 1 MOV DPTR,#data16 DPTR = 16-bit immediate constant X 1 PUSH <src> INC SP:MOV“@SP”,<src> X 1 POP <dest> MOV <dest>,“@SP”:DEC SP X 1 XCH A,<byte> ACC and <byte> exchange data X X X 1 XCHD A,@Ri ACC and @Ri exchange low nibbles X 1 The MOV <dest>, <src> instruction allows data to be transferred between any two internal RAM or SFR locations without going through the Accumulator. Remember, the upper 128 bytes of IDATA can be accessed only by indirect addressing, and SFR space only by direct addressing. Note that in any 80C51 device, the stack resides in on-chip RAM, and grows upwards. The PUSH instruction first increments the Stack Pointer (SP), then copies the byte into the stack. PUSH and POP use only direct addressing to identify the byte being saved or restored, but the stack itself is accessed by indirect addressing using the SP register. This means the stack can go into the Upper 128 bytes of RAM, if they are implemented, but not into SFR space. The Data Transfer instructions include a 16-bit MOV that can be used to initialize the Data Pointer (DPTR) for look-up tables in Program Memory, or for 16-bit external Data Memory accesses. The XCH A, <byte> instruction causes the Accumulator and addressed byte to exchange data. The XCHD A, @Ri instruction is similar, but only the low nibbles are involved in the exchange. External RAM (from microcontroller point of view) Table 4-6 shows a list of the Data Transfer instructions that access external Data Memory. Only indirect addressing can be used. The choice is whether to use a one-byte address, @Ri, where Ri can be either R0 or R1 of the selected register bank, or a two-byte address, @DPTR. All of these instructions execute in 2 mc. Note that in all external Data RAM accesses, the Accumulator is always either the destination or source of the data. The read and write strobes to external RAM are activated only during the execution of a MOVX instruction. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |