| 전자부품 데이터시트 검색엔진 |
|
ATPL00B 데이터시트(PDF) 54 Page - ATMEL Corporation |
|
|
|||||||||||||||||||||||||||||
ATPL00B 데이터시트(HTML) 54 Page - ATMEL Corporation |
|
54 / 152 page ![]() Atmel ATPL00B [datasheet] 43028A-ATPL - 9/12 54 Up Counter Operation When DCEN = 0, timer 2 operates as an up counter. The external enable bit EXEN2 in the T2CON register provides two options. If EXEN2 = 0, timer 2 counts up to FFFFH and sets the TF2 overflow flag. The overflow condition loads the 16-bit value in the reload/capture registers (RCAP2H, RCAP2L) into the timer registers (TH2, TL2). The values in RCAP2H and RCAP2L are preset by software. If EXEN2 = 1, the timer registers are reloaded by either a timer overflow or a high-to-low transition at external input T2EX. This transition also sets the EXF2 bit in the T2CON register. Either TF2 or EXF2 bit can generate a timer 2 interrupt request. Up/Down Counter Operation When DCEN = 1, timer 2 operates as an up/down counter. External pin T2EX controls the direction of the count. When T2EX is high, timer 2 counts up. The timer overflow occurs at FFFFH which sets the timer 2 overflow flag (TF2) and generates an interrupt request. The overflow also causes the 16-bit value in RCAP2H and RCAP2L to be loaded into the timer registers TH2 and TL2. When T2EX is low, timer 2 counts down. Timer underflow occurs when the count in the timer registers (TH2, TL2) equals the value stored in RCAP2H and RCAP2L. The underflow sets the TF2 bit and reloads FFFFH into the timer registers. The EXF2 bit toggles when timer 2 overflows or underflows changing the direction of the count. When timer 2 operates as an up/down counter, EXF2 does not generate an interrupt. This bit can be used to provide 17-bit resolution. Table 5-2. Timer 2 Auto-reload mode 5.2.4 Clock-Out mode In the clock-out mode, timer 2 operates as a 50%-duty-cycle, variable-frequency clock. The input clock increments TL2 at frequency FOSC/2 (where FOSC=11.059.200Hz). The timer repeatedly counts to overflow from a preloaded value. At overflow, the contents of the RCAP2H and RCAP2L registers are loaded into TH2/TL2. In this mode, timer 2 overflows do not generate interrupts. The formula gives the clock-out frequency as a function of the system oscillator frequency and the value in the RCAP2H and RCAP2L registers: TH2 RCAP 2L CLK 1/(3 x (T2PR(1:0) + 1)) TL2 TF2 „1‟ „0‟ T2 pin TR2 C/T2 Interrupt Control Hardware RCAP 2H EXF2 T2EX pin EXEN 2 FF FF (down counting reload value) (up counting reload value) |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |