| 전자부품 데이터시트 검색엔진 |
|
DSP56857 데이터시트(PDF) 332 Page - Freescale Semiconductor, Inc |
|
|
|||||||||||||||||||||||||||||
DSP56857 데이터시트(HTML) 332 Page - Freescale Semiconductor, Inc |
|
332 / 662 page ![]() Register Descriptions (ESSI0_BASE = $1FFE20, ESSI1_BASE = $1FFE00) 5685X Digital Signal Controller User Manual, Rev. 4 12-32 Freescale Semiconductor Shift Register is transferred into the Receive Data Register. If it is not enabled, the IF0 bit is cleared. 12.8.7.3 Reserved—Bit 13 This bit is reserved or not implemented. It cannot be read nor modified by writing. 12.8.7.4 Transmit FIFO Full (TFF)—Bit 12 This status bit allows monitoring when the Transmit FIFO is full. The state of this bit reflects the status of the transmitter(s) selected by the TXSF0-2 control bits. • 0 = Transmit FIFO can accept more data • 1 = Transmit FIFO is full 12.8.7.5 Transmit Last Slot (TLS)—Bit 11 This is a status bit indicating the timing of the last transmit slot during the Network mode operation. When this bit is set, the Transmit Last Slot Interrupt is asserted. The interrupt service routine for this interrupt should read the Status Register, then write 1 to this bit to clear the interrupt. If the Transmit Last Slot Interrupt is not enabled, this bit can be read by the software to determine the timing of the last slot. When the TLIE bit in the SCR3 register is disabled the status bit will only be asserted during the last slot timing. • 0 = Not currently transmitting the last time slot of the transmit frame • 1 = Last slot of the transmit frame is currently being transmitted 12.8.7.6 Receive Last Slot (RLS)—Bit 10 This is a status bit indicating the timing of the last receive slot during the Network mode operation. When this bit is set, the Receive Last Slot (RLS) interrupt bit is asserted. The interrupt service routine for this interrupt should read the Status Register and then write 1 to this bit to clear the interrupt. If the RLS interrupt is not enabled, this bit can be read by the software to determine the timing of the last slot. When the RLIE bit in the SCR3 register is disabled the status bit will only be asserted during the last slot timing. • 0 = Not currently receiving the last time slot of the receive frame • 1 = Last slot of the receive frame is currently being received |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |