| 전자부품 데이터시트 검색엔진 |
|
DSP56857 데이터시트(PDF) 348 Page - Freescale Semiconductor, Inc |
|
|
|||||||||||||||||||||||||||||
DSP56857 데이터시트(HTML) 348 Page - Freescale Semiconductor, Inc |
|
348 / 662 page ![]() Register Descriptions (ESSI0_BASE = $1FFE20, ESSI1_BASE = $1FFE00) 5685X Digital Signal Controller User Manual, Rev. 4 12-48 Freescale Semiconductor 12.8.10.3 Transmit Status Flag Control 1 (TXSF1)—Bit 9 • 0 = The indicated transmitter does not affect the status bits. • 1 = The indicated transmitter status will affect the TFF, TDE, TUE, and TFE status bits. The status from all selected transmitters is ORed to create the register status bit. These bits should be set to match the intended operation of the TE0, TE1, and TE2 control bits. 12.8.10.4 Transmit Status Flag Control 2 (TXSF2)—Bit 8 • 0 = The indicated transmitter does not affect the status bits. • 1 = The indicated transmitter status will affect the TFF, TDE, TUE, and TFE status bits. The status from all selected transmitters is ORed to create the register status bit. These bits should be set to match the intended operation of the TE0, TE1, and TE2 control bits. 12.8.10.5 Reserved—Bit 7 This bit is reserved or not implemented. It is read as, and written with a 0. 12.8.10.6 Select SC1 (SSC1)—Bit 6 This bit controls the functionality of the SC1 signal. This control bit is used only if SYN = 1 and TE2 = 0. • 0 = The SC1 acts as the serial I/O flag (IF1/OF1). • 1 = When configured as an output (SCD1 = 1), the SC1 signal acts as the transmitter 0 driver-enable, enabling an external buffer for the transmitter 0 output. Note: If SSC1 = 1 and SCD1 = 0, the configuration is invalid. 12.8.10.7 Clock Source Direction (SCKD)—Bit 5 This bit configures the source of the clock signal used to clock the Transmit Shift register in Asynchronous mode and both Transmit and Receive Shift registers are in Synchronous mode. • 0 = SCK pin is configured as an input. This pin is used as the clock source. • 1 = Internal transmit clock generator is selected. This clock is output on the SCK pin. 12.8.10.8 Serial Control Direction 2 (SCD2)—Bit 4 This bit controls the direction of the SC2 pin. • 0 = SC2 is an input. • 1 = SC2 is an output. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |