V62SLASH13624-01XE-R datasheet(8/77 Pages) TI1

8 / 77 page

MSP430F2132-EP

SLAS913A – JULY 2013 – REVISED AUGUST 2013

www.ti.com

Product Folder Links: MSP430F2132-EP

Submit Documentation Feedback

4.3 Operating Modes

The MSP430F2132 has one active mode and five software-selectable low-power modes of operation. An

interrupt event can wake up the device from any of the five low-power modes, service the request, and restore

back to the low-power mode on return from the interrupt program.

The following six operating modes can be configured by software:

•

Active mode (AM)

–

All clocks are active.

•

Low-power mode 0 (LPM0)

–

CPU is disabled.

–

ACLK and SMCLK remain active. MCLK is disabled.

•

Low-power mode 1 (LPM1)

–

CPU is disabled ACLK and SMCLK remain active. MCLK is disabled.

–

DCO dc-generator is disabled if DCO not used in active mode.

•

Low-power mode 2 (LPM2)

–

CPU is disabled.

–

MCLK and SMCLK are disabled.

–

DCO dc-generator remains enabled.

–

ACLK remains active.

•

Low-power mode 3 (LPM3)

–

CPU is disabled.

–

MCLK and SMCLK are disabled.

–

DCO dc-generator is disabled.

–

ACLK remains active.

•

Low-power mode 4 (LPM4)

–

CPU is disabled.

–

ACLK is disabled.

–

MCLK and SMCLK are disabled.

–

DCO dc-generator is disabled.

–

Crystal oscillator is stopped.

V62/13624-01XE-R 데이터시트(PDF) 8 Page - Texas Instruments

V62/13624-01XE-R 데이터시트(HTML) 8 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77

데이터시트 다운로드

링크 URL