| 전자부품 데이터시트 검색엔진 |
|
STM8S 데이터시트(PDF) 369 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM8S 데이터시트(HTML) 369 Page - STMicroelectronics |
|
369 / 467 page ![]() DocID14587 Rev 14 369/467 RM0016 Universal asynchronous receiver transmitter (UART) 377 22.7.7 Control register 3 (UART_CR3) Address offset: 0x06 Reset value: 0x00 7 654 3210 Reserved LINEN STOP[1:0] CLKEN CPOL CPHA LBCL r rwrw rw rwrw rw rw Bit 7 Reserved, must be kept cleared. Bit 6 LINEN: LIN mode enable This bit is set and cleared by software. 0: LIN mode disabled 1: LIN mode enabled Bits 5:4 STOP: STOP bits. These bits are used for programming the stop bits. 00: 1 Stop bit 01: Reserved 10: 2 Stop bits 11: 1.5 Stop bits Note: For LIN slave mode, both bits should be kept cleared. Bit 3 CLKEN: Clock enable This bit allows the user to enable the SCLK pin. 0: SLK pin disabled 1: SLK pin enabled Note: This bit is not available for UART3. Bit 2 CPOL: Clock polarity (1) This bit allows the user to select the polarity of the clock output on the SCLK pin. It works in conjunction with the CPHA bit to produce the desired clock/data relationship 0: SCK to 0 when idle 1: SCK to 1 when idle. Note: This bit is not available for UART3. Bit 1 CPHA: Clock phase (1) This bit allows the user to select the phase of the clock output on the SCLK pin. It works in conjunction with the CPOL bit to produce the desired clock/data relationship 0: The first clock transition is the first data capture edge 1: The second clock transition is the first data capture edge Note: This bit is not available for UART3. Bit 0 LBCL: Last bit clock pulse.(1)(2) This bit allows the user to select whether the clock pulse associated with the last data bit transmitted (MSB) has to be output on the SCLK pin. 0: The clock pulse of the last data bit is not output to the SCLK pin. 1: The clock pulse of the last data bit is output to the SCLK pin. Note: This bit is not available for UART3. 1. These 3 bits (CPOL, CPHA, LBCL) should not be written while the transmitter is enabled. 2. The last bit is the 8th or 9th data bit transmitted depending on the 8 or 9 bit format selected by the M bit in the UART_CR1 register. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |