전자부품 데이터시트 검색엔진
  Korean  ▼
ALLDATASHEET.CO.KR

X  

UPD17P136ACT 데이터시트(PDF) 157 Page - NEC

부품명 UPD17P136ACT
상세설명  4-BIT SINGLE-CHIP MICROCONTROLLER
PDF  292 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
제조업체  NEC [NEC]
홈페이지  http://www.nec.com/
Logo NEC - NEC

UPD17P136ACT 데이터시트(HTML) 157 Page - NEC

Back Button UPD17P136ACT Datasheet HTML 153Page - NEC UPD17P136ACT Datasheet HTML 154Page - NEC UPD17P136ACT Datasheet HTML 155Page - NEC UPD17P136ACT Datasheet HTML 156Page - NEC UPD17P136ACT Datasheet HTML 157Page - NEC UPD17P136ACT Datasheet HTML 158Page - NEC UPD17P136ACT Datasheet HTML 159Page - NEC UPD17P136ACT Datasheet HTML 160Page - NEC UPD17P136ACT Datasheet HTML 161Page - NEC Next Button
Zoom Inzoom in Zoom Outzoom out
 157 / 292 page
background image
CHAPTER 13 PERIPHERAL HARDWARE
138
Table 13-1. Data Conversion Time for the A/D Converter
Note Includes GET instruction to read data from ADCR.
(2) Single Mode
(a) Overview of single mode
In the single mode, data in the 8-bit data register (ADCR) is compared with voltage subjected to D/A
conversion and with an analog input signal from a pin.
The comparison result appears in the ADCCMP flag.
(b) Explanation of single mode operation
If ADCSOFT is 1, the A/D converter function enters the single mode.
Before single mode operation starts, port input is disabled for the pin to be used for analog input by setting
P0CnIDI to 1. (This is done for the same reason as in the successive mode.)
To start single mode operation, execute a write instruction (PUT ADCR, DBF) for the 8-bit data register
(ADCR) when ADCSOFT is 1.
The comparison result in single mode appears in ADCCMP at the execution of the third instruction after
a PUT instruction is executed to write to the 8-bit data register (ADCR). At this time, the ADCEND flag
becomes undefined.
Bits for which A/D conversion is
completed (valid bits when ADCR is read)
Most significant bit
High-order 2 bits
High-order 3 bits
High-order 4 bits
High-order 5 bits
High-order 6 bits
High-order 7 bits
All 8 bits
Number of instructions
executed after
ADCSTRT is set to 1Note
4 instructions
7 instructions
10 instructions
13 instructions
16 instructions
19 instructions
22 instructions
25 instructions



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100  ...More


데이터시트 다운로드

Go To PDF Page


링크 URL



ALLDATASHEET 가 귀하에 도움이 되셨나요?  [ DONATE ] 

Alldatasheet는?   |   광고문의   |   운영자에게 연락하기   |   개인정보취급방침   |   링크 투 데이터시트    |   링크교환   |   제조사별 검색
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com