| 전자부품 데이터시트 검색엔진 |
|
UPD17P136ACT 데이터시트(PDF) 107 Page - NEC |
|
|
|||||||||||||||||||||||||||||
UPD17P136ACT 데이터시트(HTML) 107 Page - NEC |
|
107 / 292 page ![]() CHAPTER 11 ARITHMETIC AND LOGIC UNIT (ALU) 88 11.2.2 Functions of Temporary Registers A and B Temporary registers A and B are needed for processing of 4-bit data at a time. These registers are used for temporary storage of the first and second data operands of an instruction. 11.2.3 Functions of the Status Flip-flop The status flip-flop is used for controlling operation of the ALU and for storing data which has been processed. Each flag in the status flip-flop corresponds directly to a flag in the program status word (PSWORD) located in the system register. This means that when a flag in the system register is manipulated it is the same as manipulating a flag in the status flip-flop. Each flag in the program status word is described below. (1) Z flag This flag is set (1) when the result of an arithmetic operation is 0000B, otherwise it is reset (0). However, depending on the status of the CMP flag, the conditions which cause this flag to be set (1) can be changed. (i) When CMP = 0 Z flag is set (1) when the result of an arithmetic operation is 0000B, otherwise it is reset (0). (ii) When CMP = 1 The previous state is maintained when the result of an arithmetic operation is 0000B, otherwise it is reset (0). Only affected by arithmetic operations. (2) CY flag This flag is set (1) when a carry or borrow is generated as a result of an arithmetic operation, otherwise it is reset (0). When an arithmetic operation is being performed using a carry or borrow, the operation is performed using the CY flag as the least significant bit. When a rotation (RORC instruction) is performed, the contents of the CY flag becomes the most significant bit (b3) of the general register and the least significant bit of the general register is stored in the CY flag. Only affected by arithmetic operations and rotations. (3) CMP flag When the CMP flag is set (1), the result of an arithmetic operation is not stored in either the general register or data memory. When the bit evaluation instruction is performed, the CMP flag is reset (0). The CMP flag does not affect comparison judgements, logical operations, or rotations. (4) BCD flag When the BCD flag is set (1), decimal correction is performed for all arithmetic operations. When the flag is reset (0), 4-bit binary operation is performed. The BCD flag does not affect logical operations, bit judgements, comparison judgements, or rotations. These flags can also be set through direct manipulation of the values in the program status word. At this time, the corresponding flag in the status flip-flop is also manipulated. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |