| 전자부품 데이터시트 검색엔진 |
|
STM32WB50CG 데이터시트(PDF) 56 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM32WB50CG 데이터시트(HTML) 56 Page - STMicroelectronics |
|
56 / 119 page ![]() Electrical characteristics STM32WB50CG STM32WB30CE 56/119 DS13047 Rev 5 Table 17. Current characteristics Symbol Ratings Max Unit ∑IVDD Total current into sum of all VDD power lines (source)(1) 130 mA ∑IVSS Total current out of sum of all VSS ground lines (sink)(1) 130 IVDD(PIN) Maximum current into each VDD power pin (source)(1) 100 IVSS(PIN) Maximum current out of each VSS ground pin (sink)(1) 100 IIO(PIN) Output current sunk by any I/O and control pin except FT_f 20 Output current sunk by any FT_f pin 20 Output current sourced by any I/O and control pin 20 ∑IIO(PIN) Total output current sunk by sum of all I/Os and control pins(2) 100 Total output current sourced by sum of all I/Os and control pins(2) 100 IINJ(PIN)(3) Injected current on FT_xxx, TT_xx, RST and B pins, except PB0 and PB1 –5 / +0(4) Injected current on PB0 and PB1 -5/0 ∑|IINJ(PIN)| Total injected current (sum of all I/Os and control pins)(5) 25 1. All main power (VDD, VDDRF, VDDA, VBAT) and ground (VSS) pins must always be connected to the external power supply, in the permitted range. 2. This current consumption must be correctly distributed over all I/Os and control pins. The total output current must not be sunk/sourced between two consecutive power supply pins referring to high pin count packages. 3. Positive injection (when VIN > VDD) is not possible on these I/Os and does not occur for input voltages lower than the specified maximum value. 4. A negative injection is induced by VIN < VSS. IINJ(PIN) must never be exceeded. Refer to Table 16 for the maximum allowed input voltage values. 5. When several inputs are submitted to a current injection, the maximum ∑|IINJ(PIN)| is the absolute sum of the negative injected currents (instantaneous values). Table 18. Thermal characteristics Symbol Ratings Value Unit TSTG Storage temperature range –65 to +150 °C TJ Maximum junction temperature 110 |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |