HC05RC16GRSSLASHD datasheet(78/122 Pages) NXP

78 / 122 page

Carrier Modulator Transmitter (CMT)

General Release Specification

MC68HC05RC16 — Rev. 3.0

Carrier Modulator Transmitter (CMT)

The mark and space time equations for FSK mode are:

Where fcg is the frequency output from the carrier generator, setting the

DIV2 bit in the MCSR will double mark and space times.

9.5.3 Extended Space Operation

In either time or FSK mode, the space period can be made longer than

the maximum possible value of SBUFF. Setting the EXSPC bit in the

MCSR will force the modulator to treat the next modulation period

(beginning with the next load of MBUFF/SBUFF) as a space period

equal in length to the mark and space counts combined. Subsequent

modulation periods will consist entirely of these extended space periods

with no mark periods. Clearing EXSPC will return the modulator to

standard operation at the beginning of the next modulation period. To

calculate the length of an extended space in time mode, use the

equation:

Where:

the subscripts 1, 2, ... n refer to the modulation periods that elapsed

while the EXSPC bit was set.

Similarly, to calculate the length of an extended space in FSK mode, use

the equation:

tmark

MBUFF

fcg

-------------------------------

sec

tspace

SBUFF

fcg

---------------------s

sec

((SBUFF1)+(MBUFF2+1+SBUFF2) +... (MBUFFn+1+SBUFFn)) x 8

fosc

texspace =

secs

((SBUFF1)+(MBUFF2+1+SBUFF2)+... (MBUFFn+1+SBUFFn))

fcg

texspace =

secs

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

HC05RC16GRS/D 데이터시트(PDF) 78 Page - NXP Semiconductors

HC05RC16GRS/D 데이터시트(HTML) 78 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL